Tag Archives: dc motor with gearbox

China Best Sales 24 Volt Small DC Gearbox with Diameter 40mm Gear Motor for Robot components of gearbox

Product Description

Product Parameters

Model No.:KM-4058F595-58.1-36110

Size details:
Motor Diameter: φ40mm
Motor Housing Length : 67mm
Shaft length: customization

Specifications:
 

Ratio Model No. Voltage No Load On Load
Operating
Range
Nominal
Voltage
Current Speed Current Torque Speed
V V A r/min A kg·cm r/min
1/292 KM-4058F595-58.1-36110 6.0-24.0 24          

All technical data can custom made for different application.

Customized items:
DC motor, gearbox motor, vibration motor, automotive motor.
Accessories offered like encoder, gear,worm, wire, connector.
Ball bearing or Oil-impregnated bearing.
Shaft configuration(multi-knurls,D-cut shape, four-knurls etc).
Metal end cap or plastic end cap.
 Precious metal brush/ carbon brush.
Technical data.

Detailed Photos

Application

 

Certifications

Packaging & Shipping

Company Profile

Our Advantages

FAQ

1.What kind of motor do you supply?

Kinmore specializes in making DC motors & gear motors with the diameter ranging from 6mm-80mm; automotive motors and vibration motors are our strength area, too; we also provide brushless motors.
 

2.What’s the lead time for samples or mass production?

Normally, it takes 15-25 days to produce samples; about mass production, it will take 35-40 days for DC motor production and 45-60 days for gear motor production.
 

3.Could you mind sending the quotation for this motor?

For all of our motors, they are customized based on different requirements. We will offer the quotation soon after you send your specific requests and annual quantity.
 

4.Do you offer some kinds of accessories like encoder, PCB, connector, soldering wired for the motor?

We specialize in motors, instead of accessories. But if your annual demand reaches a certain amount, we will apply to the engineer for offering the accessories.

5.Are your motors certificated with UL, CB Tüv, CE?

All of our motors are UL, CB Tüv, CE compliant, and all our items are making under REACH and ROHS. We could provide motor’s exploring drawing and BOM for your products UL certificated. We also could make motors built-in filters based on your EMC directive for your EMC passing.

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Low Speed
Excitation Mode: Excited
Function: Control, Driving
Casing Protection: Open Type
Number of Poles: 4
Customization:
Available

|

Customized Request

gearbox

Is it Better to Repair or Replace a Damaged Gearbox?

Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:

  • Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
  • Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
  • Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
  • Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
  • Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
  • Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
  • Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.

Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.

China Best Sales 24 Volt Small DC Gearbox with Diameter 40mm Gear Motor for Robot   components of gearbox	China Best Sales 24 Volt Small DC Gearbox with Diameter 40mm Gear Motor for Robot   components of gearbox
editor by CX 2023-10-23

China Professional Low Speed 60rpm Gear Motor DC Reduction Gearbox with Good quality

Product Description

low speed 60rpm gear motor dc reduction gearbox
 

1. Features of RG50M775245000
Voltage: 24V
Current: 250mA
Speed: 4-460rpm
Torque: 12-150kgf.cm
Typical applications: Central air-conditioning walve, grill, oven, CHINAMFG pumps, ATM bank automatic system, robot, medical equipment, office equipment

2. Specifications of RG50M775245000

Note: It’s the typical specificaitoin for reference only, We can choose DC motor with different voltage speed to meet your torque and speed requirement.

Company Profile

1. About us
Business Type: Manufacturer, Trading Company Verified
Location: ZHangZhoug, China (Mainland) Verified
Main Products: 1) DC Brush motor: 6-130mm diameter, 0.01-1000W output power
                           2) DC Spur Gear Motor: 12-110mm diameter, 0.1-300W output power
                           3) DC Planeary Gear Motor: 10-82mm diameter, 0.1-100W output power 
                           4) Brushless DC Motor: 28-110mm, 5-1500W output power 
                           5) Stepper Motor: NEMA 08 to NEMA 43, Can with gearbox and lead screw
                           6) Servo Motor: 42mm to 130mm diameter, 50-4000w 
                           7) AC Gear Motor: 49 to 100mm diameter, 6-140 output power 
Total Employees: 51 – 100 People
Total Annual Revenue: $5 Million – $10 Million
Year Established: 2014 Verified
Top 3 Markets: Western Europe 20.00%  North America 15.00%  Domestic Market 12.00%
Product Certifications : CE, RoSH, RoSH CE 
Trademarks : NBLEISON

2. Production

1)Production line

2) Product components

Packing&Delivery

Certifications

Customer Visits

FAQ
Q: What’s your main products?
A:We currently produce Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q:How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed life time and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have customized service for your standard motors?
A:Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: you have individual design service for motors?
A:Yes, we would like to design motors individually for our customers, but it may need some mould charge and design charge. 

Q:Can I have samples for testing first?
A:Yes, definitely you can. After confirmed the needed motor specs, we will quote and provide a proforma invoice for samples, once we get the payment, we will get a PASS from our account department to proceed samples accordingly.

Q:How do you make sure motor quality?
A:We have our own inspection procedures: for incoming materials, we have signed sample and drawing to make sure qualified incoming materials; for production process, we have tour inspection in the process and final inspection to make sure qualified products before shipping.

Q:What’s your lead time?
A:Generally speaking, our regular standard product will need 25-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depends on the specific orders

Q:What’s your payment term?
A:For all our new customers, we will need 40% deposite, 60% paid before shipment.

Q:When will you reply after got my inquiries?
A:We will response within 24 hours once get your inquires.

Q:How can I trust you to make sure my money is safe?
A:We are certified by the third party SGS and we have exported to over 85 countries up to June.2017. You can check our reputation with our current customers in your country (if our customers do not mind), or you can order via alibaba to get trade assurance from alibaba to make sure your money is safe.

Q:What’s the minimum order quantity?
A:Our minimum order quantity depends on different motor models, please email us to check. Also, we usually do not accept personal use motor orders. 

Q:What’s your shipping method for motors?
A:For samples and packages less than 100kg, we usually suggest express shipping; For heavy packages, we usually suggest air shipping or sea shipping. But it all depends on our customers’ needs.

Q:What certifications do you have?
A:We currently have CE and ROSH certifications.

Q:Can you send me your price list?
A:Since we have hundreds of different products, and price varies per different specifications, we are not able to offer a price list. But we can quote within 24 hours once got your inquirues to make sure you can get the price in time.

Q:Can I visit your company?
A:Yes, welcome to visit our company, but please let us know at least 2 weeks in advance to help us make sure no other meetings during the day you visit us. Thanks!

 

Application: Household Appliances, Robot, Toys, Door Lock, Monitor
Operating Speed: Low Speed
Function: Driving
Casing Protection: Totally Encolosed
Structure and Working Principle: Brush
Certification: Ce, RoHS
Samples:
US$ 15/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

What is a Gearbox and How Does It Work?

A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.

Here’s how a gearbox works:

  1. Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
  2. Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
  3. Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
  4. Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.

Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.

China Professional Low Speed 60rpm Gear Motor DC Reduction Gearbox   with Good quality China Professional Low Speed 60rpm Gear Motor DC Reduction Gearbox   with Good quality
editor by CX 2023-10-07

China high quality 5V 12V DC Electric Speed Gearbox Assembly for Motor with Hot selling

Product Description

Product Description

Our company is an advanced leading Chinese manufacturer and supplier, which provides high performance products and efficient international services to the world.we focus on producting varies kinds of reduction stepper motors,synchronous motors,micro water pumps,which are widely used in air-conditioner,refrigerator,intelligent sanitary,automatic door lock,monitor,electronic instruments.All of our products can be customized.

Our stepper motors are used widely in the valve control system,air-condetioner,sanitary ware,CCTV monitoring system,industrial automation control,and other industries.Following is the parameters of the 30BYJ46 stepper motor:
1 rated voltage: DC 12V
2 step: 7.5 ~ /85
3 reduction ratio: 1/85
4 output torque: > 78.4mN.m
5 self positioning torque: > 49mN.m
6 noise: “40dB”

Huayang stepper motor products are widely used in the fields of household appliances,cleaning equipment,pump products and industrial automation,such as air condioner,washing machines,dishwashers ,vacuum cleaners,etc.
With the improvement of living standards, more and more families get surveillance camera. The corresponding surveillance camera motor market is developing rapidly.

Performance  Parameters

 

Model Voltage
V
Resistance (Q)/Phase  (at 25ºC)
(Ω)
Operating
Frequenc (PPS)
Pull-in Torque  
(mN.m) 100PPS
Detent
Torque
(mN.m)
Max. Freeload
Pull-in
(PPS)
Max. Freeload
Pull-out
Frequency
(PPS)
Temperature
Rise
K
Noise dB
(A)
Step Angle
(1-2Phase)
nsulation
Class
30BYJ46 12 110 100 ≥98 ≥78.4 ≥350 ≥800 ≤ 50 ≤40 7.5°/85.25 E
12 130 100 ≥78.4 ≥39.2 ≥350 ≥800 ≤50 ≤40
12 200 100 ≥58.8 ≥39.7 ≥350 ≥600 ≤50 ≤40

Mechanical    Dimensions:mm

Application: Home Applications
Speed: Low Speed
Number of Stator: Three-Phase
Excitation Mode: PM-Permanent Magnet
Function: Control, Driving
Number of Poles: 12
Customization:
Available

|

Customized Request

gearbox

Different Types of Gearboxes and Their Applications

There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:

  • Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
  • Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
  • Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
  • Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
  • Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
  • Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
  • Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.

Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.

China high quality 5V 12V DC Electric Speed Gearbox Assembly for Motor   with Hot selling		China high quality 5V 12V DC Electric Speed Gearbox Assembly for Motor   with Hot selling
editor by CX 2023-09-12

China high quality 12V Gearbox DC for Check Scanner Motor with Best Sales

Product Description

Motor Powers Life ! 

Power Motor has been committed to Development and Production of micro-motors for different applications segments since 2001.  

The check scanner motor is a 12V spur gear DC motor, which provides the best torque for check scHangZhou operation, high efficiency, low noise, compact structure and stable quality. Power Motor has a perfect gearbox motor customization platform, 20 years of technical advantages, fast customization of high-quality motor solutions.

  • Model:PGM.40F series
  • Voltage:12 V
  • Torque:40 mN.m
  • Power:0.65 W
  • Speed:155.7 RPM

 

Application: Universal, Industrial, Household Appliances, Scanner
Operating Speed: Low Speed
Function: Driving
Structure and Working Principle: Brush
Certification: ISO9001
Brand: Power
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Is it Better to Repair or Replace a Damaged Gearbox?

Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:

  • Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
  • Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
  • Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
  • Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
  • Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
  • Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
  • Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.

Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.

China high quality 12V Gearbox DC for Check Scanner Motor   with Best Sales China high quality 12V Gearbox DC for Check Scanner Motor   with Best Sales
editor by CX 2023-09-07

China supplier DC 12V 200rpm Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 25mm Diameter Gearbox with Good quality

Product Description

DC 12V 200RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 25mm Diameter Gearbox

1)Product Description:
    
1°size:Diameter 25mm 
    2°lifespan:2000 hours 
    3°gear material: plastic or brass
    4°IP rate:IP54
2)Motor Specification:
 

Type DC 12V 24V Plantary Gear Motor
Motor  Diameter  25mm
Voltage 12v 24v
Power ≤1.2W
Torque ≤0.8N.M
Speed ≤200RPM
Material of gear Plastic or Brass
OEM/ODM Service Accept
Usage Electric height adjustable table ,electric forklift ,vending macine,auto garage door opener,sweeper,vacuum cleaner,industrial machine,other electric tools .

3)Drawing of Motor:   

4)Drawing of shaft opinion:


3)Packing details:
 

4)Factory show:

5)Transfer way:

6)Workshop:


 

7)FAQ:

Q: Are you trading company or manufacturer ?

A: We are Integration of industry and trade, with over 20 years experience in DC worm gear motor. Our company have accumulated skilled production line, complete management and powerful research support, which could match all of the customers’ requirements and make them satisfaction.
 

Q: What is your main product?

DC Motor: Gear motor, Square motor, Stepped motor, and Micro motor
-Welding equipment: Wire feeder, Welding rod, Welding Torch, Earth clamp, Electrode holder, and Rectifier
 

Q: What if I don’t know which DC motor I need?

A: Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
 

Q: What is your terms of payment ?

A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
 

Q: How to delivery:

A: By sea – Buyer appoint forwarder, or our sales team find suitable forwarder for buyers. 

By air – Buyer offer collect express account, or our sales team find suitable express for buyers. (Mostly for sample)
Others – Actually,samples send by DHL,UPS, TNT and Fedex etc. We arrange to delivery goods to some place from China appointed by buyers.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

8) Contact information:

 

 

 

 

 

 

 

 

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Industrial, Household Appliances, Power Tools
Operating Speed: Constant Speed
Excitation Mode: Excited
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

gearbox

Benefits of Regular Gearbox Maintenance

Regular maintenance of gearboxes offers numerous advantages:

  • Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
  • Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
  • Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
  • Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
  • Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
  • Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
  • Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
  • Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
  • Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.

Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.

China supplier DC 12V 200rpm Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 25mm Diameter Gearbox   with Good quality China supplier DC 12V 200rpm Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 25mm Diameter Gearbox   with Good quality
editor by CX 2023-08-24

China Robot 50rpm 12V 76mm DC Brushed Motor Permanent Magnet with Worm Gear Box gearbox and motor

Merchandise Description

BG 76ZYT DC Brushed Motor 
Environmental Circumstances -20ºC~50ºC
Insulation Clase B
Security course IP44
Sounds ≤65dB
Self-Locking Operate Yes
Lifespan >1000h

 

Electrical Specs
Model RATED LOAD NO LOAD   STALL
 Voltage    Power  

  Speed  

Gear Ratio

 Torque    Current   Speed    Current   Torque   Current 
V W rpm 1:xx N.m A rpm A   N.m   A  
BG-76ZYT  twelve 90 fifty 1:60 twelve seven.five sixty .5 / /
BG-76ZYT-1 24 one hundred forty five one:60 15

four.

55 .5 / /
BG-76ZYT-two 48 one hundred twenty thirty 1:60 twenty 3. 40 .6 / /
We can also customise products according to consumer needs.  

Set up in 1994, HangZhou BG Motor Manufacturing unit is a professional producer of brushless DC motors, brushed DC motors, planetary equipment motors, worm equipment motors, Common motors and AC motors. We have a plant area of 6000 square meters, numerous patent certificates, and we have the independent style and advancement abilities and robust technical force, with an annual output of more than 1 million models. Since the commencing of its institution, BG motor has concentrated on the overall remedy of motors. We manufacture and design motors, give expert personalized companies, reply swiftly to customer needs, and actively help customers to remedy problems. Our motor goods are exported to 20 international locations, like the United States, Germany, Italy, the United Kingdom, Poland, Slovenia, Switzerland, Sweden, Singapore, South Korea and so forth.
Our founder, Mr. Sunshine, has far more than forty a long time of encounter in motor engineering, and our other engineers also have more than fifteen a long time of encounter, and sixty% of our staff have a lot more than ten several years of expertise, and we can assure you that the quality of our motors is best notch.
The goods include AGV, underwater robots, robots, stitching equipment business, automobiles, medical tools, automatic doorways, lifting equipment, industrial tools and have a wide variety of apps.
We attempt for CZPT in the high quality of each and every solution, and we are only a little and advanced company.
Our vision: Push the world forward and make lifestyle much better!

Q:1.What type of motors can you give?

A:At existing, we mostly make brushless DC motors, brush DC motors, AC motors, Universal Motors the power of the motor is considerably less than 5000W, and the diameter of the motor is not much more than 200mm

Q:2.Can you send me a cost listing?

A:For all of our motors, they are tailored dependent on distinct demands like life time, sounds,voltage,and shaft and so forth. The cost also differs in accordance to once-a-year quantity. So it truly is really difficult for us to supply a value listing. If you can share your thorough needs and annual quantity, we are going to see what provide we can offer.

Q:3.Can l get some samples?

A:It depends. If only a number of samples for personal use or substitution, I am frightened it’ll be hard for us to offer due to the fact all of our motors are customized created and no inventory available if there are no even more demands. If just sample testing prior to the formal purchase and our MOQ,value and other phrases are appropriate,we might enjoy to offer samples.

Q4:Can you supply OEM or ODM services?

A:Sure,OEM and ODM are each accessible, we have the professional R&D dept which can provide professional remedies for you.

Q5:Can l go to your factory prior to we area an order?

A:welcome to pay a visit to our factory,we are extremely delighted if we have the opportunity to know every other more.

Q:6.What is the guide time for a normal buy?

A:For orders, the common guide time is 15-20 days and this time can be shorter or for a longer time based mostly on the different model,period and amount.

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Robot Arm
Operating Speed: Low Speed
Excitation Mode: DC
Function: Driving
Casing Protection: Closed Type
Number of Poles: Can Be Choosen

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

BG 76ZYT DC Brushed Motor 
Environmental Conditions -20ºC~50ºC
Insulation Clase B
Protection class IP44
Noise ≤65dB
Self-Locking Function YES
Lifespan >1000h

###

Electrical Specifications
Model RATED LOAD NO LOAD   STALL
 Voltage    Power  

  Speed  

Gear Ratio

 Torque    Current   Speed    Current   Torque   Current 
V W rpm 1:xx N.m A rpm A   N.m   A  
BG-76ZYT  12 90 50 1:60 12 7.5 60 0.5 / /
BG-76ZYT-1 24 100 45 1:60 15

4.0

55 0.5 / /
BG-76ZYT-2 48 120 30 1:60 20 3.0 40 0.6 / /
We can also customize products according to customer requirements.  
Application: Universal, Industrial, Household Appliances, Car, Power Tools, Robot Arm
Operating Speed: Low Speed
Excitation Mode: DC
Function: Driving
Casing Protection: Closed Type
Number of Poles: Can Be Choosen

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

BG 76ZYT DC Brushed Motor 
Environmental Conditions -20ºC~50ºC
Insulation Clase B
Protection class IP44
Noise ≤65dB
Self-Locking Function YES
Lifespan >1000h

###

Electrical Specifications
Model RATED LOAD NO LOAD   STALL
 Voltage    Power  

  Speed  

Gear Ratio

 Torque    Current   Speed    Current   Torque   Current 
V W rpm 1:xx N.m A rpm A   N.m   A  
BG-76ZYT  12 90 50 1:60 12 7.5 60 0.5 / /
BG-76ZYT-1 24 100 45 1:60 15

4.0

55 0.5 / /
BG-76ZYT-2 48 120 30 1:60 20 3.0 40 0.6 / /
We can also customize products according to customer requirements.  

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
gearbox

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China Robot 50rpm 12V 76mm DC Brushed Motor Permanent Magnet with Worm Gear Box     gearbox and motor	China Robot 50rpm 12V 76mm DC Brushed Motor Permanent Magnet with Worm Gear Box     gearbox and motor
editor by czh 2023-01-21

China 3V DC Motor with Gearbox Used for Electric Locks and Robots gearbox adjustment

Merchandise Description

 

Product Parameters

Model No.: KM-12FN30-fifty-02.5100

Measurement details:
Motor Diameter: φ12mm
Equipment box duration : 10mm
Shaft size: customization
Specs:
Rated voltage: DC 2.5V
Course of rotation: CW/CCW 
No load speed: 100rpm
No load existing: .04A 
Rated torque: 540g.cm 
Rated velocity: 80rpm

All technological data can personalized created for distinct application.

Tailored things:
DC motor, gearbox motor, vibration motor, automotive motor.
Add-ons provided like encoder, equipment,worm, wire, connector.
Ball bearing or Oil-impregnated bearing.
Shaft configuration(multi-knurls,D-lower form, four-knurls and many others).
Metallic stop cap or plastic conclude cap.
 Precious metallic brush/ carbon brush.
Complex information.

Comprehensive Photographs

Application

 

Certifications

Packaging & Shipping

Firm Profile

Our Rewards

FAQ

one.What variety of motor do you offer?

Kinmore specializes in creating DC motors & equipment motors with the diameter ranging from 6mm-80mm automotive motors and vibration motors are our power location, as well we also give brushless motors.
 

2.What is actually the lead time for samples or mass production?

Generally, it takes fifteen-twenty five days to generate samples about mass generation, it will consider 35-forty times for DC motor creation and forty five-sixty days for equipment motor generation.
 

three.Could you brain sending the quotation for this motor?

For all of our motors, they are customized dependent on diverse demands. We will offer the quotation before long right after you deliver your distinct requests and once-a-year quantity.
 

4.Do you offer you some kinds of add-ons like encoder, PCB, connector, soldering wired for the motor?

We specialize in motors, as an alternative of accessories. But if your annual need reaches a certain quantity, we will utilize to the engineer for offering the add-ons.

5.Are your motors certificated with UL, CB Tüv, CE?

All of our motors are UL, CB Tüv, CE compliant, and all our items are generating under Reach and ROHS. We could give motor’s exploring drawing and BOM for your items UL certificated. We also could make motors built-in filters based on your EMC directive for your EMC passing.

 

US $4
/ Piece
|
1,000 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Constant Speed
Excitation Mode: Compound
Function: Control, Driving
Casing Protection: Open Type
Number of Poles: 2

###

Customization:
US $4
/ Piece
|
1,000 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Constant Speed
Excitation Mode: Compound
Function: Control, Driving
Casing Protection: Open Type
Number of Poles: 2

###

Customization:

Key Market Insights Related to Worm Reduction Gearboxes

A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.
gearbox

Backlash measurement

Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.

Worm reduction gearboxes

Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
gearbox

Worm reduction gearboxes with closed bladders

The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.

Shaft arrangement of a gearbox

The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
gearbox

Mounting of a gearbox

In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.

China 3V DC Motor with Gearbox Used for Electric Locks and Robots     gearbox adjustment	China 3V DC Motor with Gearbox Used for Electric Locks and Robots     gearbox adjustment
editor by czh 2022-12-31

in Depok Indonesia sales price shop near me near me shop factory supplier 20mm 6V 12V Parallel Shaft DC Gear Motor with Small Gearbox manufacturer best Cost Custom Cheap wholesaler

  in Depok Indonesia  sales   price   shop   near me   near me shop   factory   supplier 20mm 6V 12V Parallel Shaft DC Gear Motor with Small Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

Superior thermo treatment equipment, this sort of as network warmth treatment oven, multi-use thermo treatment method oven, and so on. We inspect every piece of bearing by ourselves ahead of shipping. Our primary merchandise are Needle Roller bearings, Cylindrical Roller Bearings, Rod end Bearings, Spherical simple bearings, Monitor roller Bearings for Guideway, Roller Bearings, Mix Bearings for forklifts, H2o Pump Bearings, SNR Automobile Bearings and all kinds of Spherical Bearings. EPTT MOTOR – DC Equipment EPTT D202A1(20MM) – Central AXiHu (West Lake) Dis.s

Specs:

-Voltage: 4.8-12V
-Velocity: twelve-1000RPM
-Torque: .15-4Kg. Cm
-Existing: 200-670mA
-Output: 370-1500mW

Drawing:

Amount of levels 3 4 5 6 seven
Equipment ratio i 10 25 50 one hundred 250
12.five 31.25 62.5 125 312.five
78.1 156.25 390.six
195.3 488.three
Duration of EPTT L (mm) sixteen. 17.5 19. 20.5

Specification:

Model VOLTAGE
V
NO LOAD AT MAXiHu (West Lake) Dis.MUM Efficiency STALL
Speed
rpm
Recent
mA
Speed
rpm
TORQUE
kg.cm
Current
mA
OUTPUT
mW
TORQUE
Kg.cm
Present
mA
D202-057171 12. 1300 one hundred 1000 .fifteen 350 1500 .8 1500
D202-004571 6. 270 140 two hundred .35 450 750 1.five 1300
D202-004062 twelve. 140 60 100 .four two hundred 410 two.five five hundred
D202-571156 6. sixty five ninety 50 1. four hundred 500 four.5 1300
D202-012195 6. 36 sixty 28 1.two 200 370 6. 800
D202-5711 4.eight 24 150 16 four. 670 650 eight. 1800
D202-030488 6. fifteen eighty 12 three. 290 370 8. 900

About Us:

We EPTTized in studying, deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ing and servicing electrical motors, EPTT and substantial precision EPTTs with the modest modules.

Following years of deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment, we have an unbiased solution layout and the R ampD group, provider group, and skilled top quality management group.

What is far more, we have two joint ventures. 1 is positioned in HangEPTT, which makes hybrid stepper motor, valuable linear stepper motor, brushless DC motor, servo motor, stepper motor EPTTr, brushless motor EPTTr, encoEPTTand brake.

Yet another one particular is positioned in HangEPTT, which creates DC EPTT motor. The factory has dozens of CNC EPTTs and substantial precision test gear, implements the procedure management and automated procedure in most
creating method.

We also have two cooperation factories. 1 is producing AC reversible synchronous motor and AC servo motor, the other one particular is creating linear long term stepper motor, long term stepper motors.

Certificate:

Perform Movement:

Customer’s Go to:

Associated EPTT:

  in Depok Indonesia  sales   price   shop   near me   near me shop   factory   supplier 20mm 6V 12V Parallel Shaft DC Gear Motor with Small Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Depok Indonesia  sales   price   shop   near me   near me shop   factory   supplier 20mm 6V 12V Parallel Shaft DC Gear Motor with Small Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

Custom made in China – replacement parts – in Albuquerque United States Small 12V DC Gear Motor Speed Reduction with D Shaft Gearbox 4mm Output Shaft with ce certificate top quality low price

Custom  made in China - replacement parts -  in Albuquerque United States  Small 12V DC Gear Motor Speed Reduction with D Shaft Gearbox 4mm Output Shaft with ce certificate top quality low price

Custom  made in China - replacement parts -  in Albuquerque United States  Small 12V DC Gear Motor Speed Reduction with D Shaft Gearbox 4mm Output Shaft with ce certificate top quality low price

We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 different branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Description:
Solution Title : Speed reducer, geared motor
Gearbox Type: Planet straight tooth gearhead
Motor kind : Carbon brushed / Brushless / Stepper gear motor
Material: Powder metallurgy Metal 
Bearing at output shaft : ball bearing / sintered steel bearing 
Equipment Ratio : 5:1 , ten:1 , twenty:1 , twenty five:1 , thirty:1 , 40:1 , 50:1 , sixty:1 ,70:1…100:1, two hundred:1, three hundred:1…  customised
Gearbox diameter : 6mm , 10mm , 12mm , 16mm , 22mm , 24mm , 32mm , 38mm , 42mm ……
3V , 6V ,12V ,24V offered .
D Shaft :4mm
Custom made RPM .
Torque: twenty – fifty Nm, ten-20Nm, 5-10Nm,1 – 5 Nm, .5 – 1 Nm, .2 – .5 Nm, – .1 Nm, .1 – .2 Nm

We are a manufacturing unit specialized in steel parts hardware & metallic gearbox geared motor through powder metallurgy method .We services with ODM/OEM equipment box design and improvement , gearmotors manufacture.Offered with different speeds / RPM and momentum.Our metallic planetary drives are characterised by excellent longevity and peaceful running at substantial torques .

A planetary (or epicyclical) gearbox utilizes epicyclical gears for pace reduction. It is composed of one particular or far more toothed whee EPT turning close to a rotating shaft. Each and every rotates on its own axis as well as revolving all around the central shaft. This gives great reduction capacity in a tiny room, creating them typical in automated transmissions.
In an epicyclic or planetary equipment prepare, several spur gears dispersed evenly close to the circumference run amongst a equipment with internal tooth and a gear with exterior tooth on a concentric orbit. The circulation of the spur gear will take place in analogy to the orbiting of the planets in the solar method.

  • The sun gear
  • The planet gears and the world gears’ carrier
  • The ring gear

Planetary Gearbox advantages:

  • Coaxial arrangement of input shaft and output shaft
  • Load distribution to several planetary gears
  • High efficiency owing to low rolling power
  • Almo EPT unlimited transmission ratio alternatives owing to combination of several earth phases
  • Suited as planetary switching equipment due to fixing this or that part of the gearbox
  • Probability of use as overriding gearbox
  • Favorable volume output
  • Suitability for a wide range of application

Software :

  • Health-related and Health Industry
  • Electronics and Telecommunication Market
  • Robotics Sector
  • EPT Business
  • CNC, Equipment, and Instrument EPT Industries
  • Car, Textile, Printing, Meals, and Metallurgical Industries

Geared motors for automatic gadget .

Custom made little gear motors , planet gearhead , metallic gearbox , tiny planetary gear 

 

 

Our workshop

The use of authentic products manufacturer’s (OEM) element numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our organization and the listed alternative elements contained herein are not sponsored, accredited, or created by the OEM.

Custom  made in China - replacement parts -  in Albuquerque United States  Small 12V DC Gear Motor Speed Reduction with D Shaft Gearbox 4mm Output Shaft with ce certificate top quality low price

Custom  made in China - replacement parts -  in Albuquerque United States  Small 12V DC Gear Motor Speed Reduction with D Shaft Gearbox 4mm Output Shaft with ce certificate top quality low price

Custom  made in China - replacement parts -  in Albuquerque United States  Small 12V DC Gear Motor Speed Reduction with D Shaft Gearbox 4mm Output Shaft with ce certificate top quality low price

Geared shop made in China replacement parts in Pune India BLDC Motor Planetary Gearbox Ratio 15~50: 1 with NEMA 23 120W 24V Brushless DC Motor with top quality

Geared shop made in China  replacement parts  in Pune India BLDC Motor Planetary Gearbox Ratio 15~50: 1 with NEMA 23 120W 24V Brushless DC Motor with prime high quality

We – EPG Group the biggest gearbox & motors , couplings and gears manufacturing facility in China with 5 different branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Geared BLDC Motor Planetary Gearbox Ratio fifteen~fifty:1 with NEMA 23 120W 24V Brushless DC Motor (Ratio thirty:1)

1.Attributes

1). High performance
two). Prolonged functioning lifestyle
3). Low sounds
four). Very good temperature increase
five). Very good stability
6). The most offered layout for the optimized managing.

two Dimension

3  Product Image

4  Specifications  Nema17 forty two Series 

Model DMW421 DMW422 DMW423
 Voltage V 24
  No load speed rpm 5000 5000 5000
 Rated torque Nm .063 .094 .125
 Rated Speed rpm 4000 4000 4000
 Rated Current A one.seven 2.5 three.5
 Torque(max) Nm .19 .27 .38
 Back-EMF constant V/Krpm 3.13 three.13 3.fifteen
 Torque Constant Nm/A .039 .04 .04
 Resistance ohm one.5 .53 .74
 Weight Kg .three .4 .5
 Length mm forty one fifty one 6

five Business Present

6 Principal Merchandise

HangZhou Shnmotor is a developing producing and ept company which aims at the electrical items of refrigeration market place. We have a highly competent team, which has in excess of eight a long time encounter on Machinery planning, production, handling and buyer provider concept coronary heart & soul. ISO 9000 common and 6S management assure the most powerful good quality handle on every single component and every single procedure of the merchandise. 

Our Principal Merchandise as under:
1)Brushless DC Motor
2)Setpping Motor 
three)AC Motor
4)Motor Team
(Motor+Reducer+Driver+Brake)

seven Pac ept & Shipping

eight Application
CNC equipment: engraving device, milling equipment, coiling machine, spar ept equipment, wire-electrode slicing and so on.
Electronic equipment: up-coiler, stripping machine, lithum battery creation tools, dispensing device and so on.
Packaging products: filling machine, set duration reducing machine, tissue paper machine, paper diaper equipment and so on.
Textile products: flat knitting device, hosiery machine, embroidery device, spinning equipment, knitting machine and so on.
Laser machine: screen printing device, pad printing machine and so on.
Printing equipment: carving device, reducing machine, labeling equipment and so on.
Other folks : Robot , unmanned aerial car and so on .

9 Buyer’s Xihu (West Lake) Dis.
one.Motors creation
All the products we bought right here are created by czshn motors and electrical appliance manufacturing unit ,HangZhou , ZheJiang Province ,China.
two.Motors assortment
Make sure you speak to us to affirm the product and other details of the motor just before buy. 
three.Payment 
We can provide samples and take fully prepayment only . 50% ept is essential for bulk purchase and stability ahead of cargo .Paypal, Western Union, T/T are all approved.
four.Supply
Samples in inventory can be sent inside 7 days and personalized samples inside 30 days. Shipping and delivery day for bulk get is dependent on quantity.
5.Suggestions and after-sale service 
Any troubles in employing are welcome to be informed ! Our technician will give you expert advise . We will give you free upkeep inside 24 months if the flaws are the result of generation .

FAQ

Q: How to choose a motor to match my machine?
A: Please give us the important parameters of the motor. Right here are some crucial specs we need : holding torque, physical dimension (diameter ,length and many others.),  voltage, current and many others. Feel free to speak to us and give the details, we are very glad to support you if you are confused in assortment.
 
Q: If I require a special motor , can you manufacture?
A: Definitely, you can. If you want to replace a motor in an existing application,please send us a drawing or sample and we can help you discover a suitable substitution. Or, you can contact us and explain your application, our engineers will work together with you to find a solution tailor-made for you.
 
Q: Do you have any items in inventory? Can I order samples 1st? 
A: We stock numerous of our regular versions. If you would like to examination a sample first, we are glad to ship some your way. Of system we do not stock specialized motors. If you have particular demands, you should enable us know and we will try our best to send out you samples as before long as attainable.
  
Q: How prolonged should I expect the lead-time/shipping and delivery to be?
A:  If you are buying samples of common types, we can generally have them transported and shipped within 15 days by air. When requesting personalized motors, please permit us a 4-5 7 days guide-time.
 
Q: How are your items delivered?
A: We are very adaptable with transport and have dealings with most key courier companies close to the entire world. When inserting an buy, merely offer us a shipping address and make contact with info, we will manage the rest. If there is a forwarder or courier you desire to use, just let us know and we will accommodate.
 
Q: What about the good quality of your motors? 
A: Offering top quality goods is an absolute priority for us. We have examination procedures all through the production method starting up from individual components. If you want a specialized motor from us, we also increase our existing examination plans with personalized tests answers. In the unusual situation that an issue does occur, we will function with you to resolve any issues in a timely and clear way.
 
Q: Can you supply OEM solutions? Can I request my possess emblem?
A: Indeed, we can provide OEM companies for volume generation. Feel free of charge to chat to us about your branding requirements.
 

The use of unique gear manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our firm and the shown replacement areas contained herein are not sponsored, approved, or created by the OEM.

Geared shop made in China  replacement parts  in Pune India BLDC Motor Planetary Gearbox Ratio 15~50: 1 with NEMA 23 120W 24V Brushless DC Motor with best top quality

Geared shop made in China  replacement parts  in Pune India BLDC Motor Planetary Gearbox Ratio 15~50: 1 with NEMA 23 120W 24V Brushless DC Motor with prime quality