Tag Archives: china motor

China Good quality F Series Helical Parallel Gearbox with IEC Motor gearbox design

Product Description

F series Parallel Shaft-Helical Geared Motor Characteristics

1.Features:

  1. High efficiency: 92%-94%;
  2. Parallel output, compact structure, large output torque, smooth operation, low noise and long service life.
  3. High precision: the gear is made of high-quality alloy steel forging, carbonitriding and hardening treatment, grinding process to ensure high precision and stable running.
  4. High interchangeability: highly modular, serial design, strong versatility and interchangeability.

2. Technical parameters

Ratio 3.77-276.77
Input power 0.12-200KW
Output torque 3.5-21700N.m
Output speed 5-352rpm
Mounting type Foot mounted, foot mounted with CHINAMFG shaft, output flange mounted, hollow shaft mounted, B5 flange mounted with hollow shaft, foot mounted with hollow shaft, B14 flange mounted with hollow shaft, foot mounted with splined hole, foot mounted with shrink disk, hollow shaft mounted with anti-torque arm. 
Input Method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor
Brake Release HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position)
Thermistor TF(Thermistor protection PTC thermisto)
TH(Thermistor protection Bimetal swotch)
Mounting Position M1, M2, M3, M4, M5, M6
Type F37-F157
Output shaft dis. 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing material HT200 high-strength cast iron from R37,47,57,67,77,87
Housing material HT250 High strength cast iron from R97 107,137,147,
157,167,187
Heat treatment technology carbonitriding and hardening treatment
Efficiency 92%-94%
Lubricant VG220
Protection Class IP55, F class

Starshine Drive

ZheJiang CHINAMFG Drive Co.,Ltd,the predecessor was a state-owned mould enterprise, was established in 1965. CHINAMFG specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
CHINAMFG have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our Team

Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective 
measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
 found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of 
customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the 
product is a product inspection to determine the qualified products.

7. Certification.
All our products get ISO & CE & UL certification.

Packing

Delivery

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Parallel Shaft
Layout: Coaxial
Gear Shape: Bevel Gear
Step: Two Step or Three Step
Customization:
Available

|

Customized Request

gearbox

Common Problems with Gearboxes and How to Troubleshoot Them

Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:

  1. Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
  2. Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
  3. Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
  4. Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
  5. Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
  6. Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
  7. Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
  8. Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
  9. Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
  10. Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.

Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.

China Good quality F Series Helical Parallel Gearbox with IEC Motor   gearbox design		China Good quality F Series Helical Parallel Gearbox with IEC Motor   gearbox design
editor by CX 2024-05-16

China manufacturer High Torque 4 Series 80*80mm F1 type concentric square flange reducer Gear box For AC DC motor automatic gearbox

Product Description

 

Warm Tips

Please inquiry and confirm us before orders.
 

Company Profile

       HangZhou CHINAMFG Industrial Co.,Ltd. is a Chinese manufacturer of servo motor, servo driver, small and medium gear reduction motor.Who has passed the ISO 9001 international Quality System Certification. Most of the products have got CE and CCC certifications. These products are sold all over the world such as the United States, Europe, Southeast Asia and Middle East,etc.
       The core products are include the universal servo motor, servo driver, G1 series micro/small reduction motor (power:from 6W to 400W).Torque motor,L series Linear type reduction motor, F1 series orthogonal reduction motor, CB type gear reduction motor with electromagnetic clutch and brake, AC/DC speed controller and reduction motor accessories, GH,G3,G4 type medium reduction motor (Power :from 0.1kw to 3.7kw), the gear motors for poultry farm equipment, stainless steel thermostability long shaft motor, etc. They have been widely applied in the embroidery machine, CNC machine, packing machine, engraving machine, printing machinery, packing machinery, textile machinery, household appliances, etc.
      We shall meet customer increasing demand.
      We shall provide customer with our best service.

 

Certifications

Product Description

 

FAQ

1. Q: What is the warranty of your products?
A: All parts have a One-Year Warranty as long as it is within the warranty period and proof of purchase is avaliable. Improper use or installation is not a manufacturer’s defect.

2. Q: How long is your delivery time?
A: Generally, it is 3-7 business days if the goods are in stock or it is 7-15days if the goods are not in stock. It is according to customer’s quantity and request.

3. Q: What payment method can I use? And what’s your terms of payment?
A: We can accept Company Bank transfer and Western Union. For samples, it’s 100% T/T in advance. For orders, it’s 30% T/T in advance, and 70% balance before shipment.

4. Q: Do you provide samples? Is it free or extra? 
A: Yes, we can provide the sample, but the customer should pay for the cost. We could use FEDEX/ DHL/ TNT shipping, and it may take 5-7 business days.

 

Contact Information

 

INTERNATIONAL TRADE DEPARTMENT 
ADD:No.188 Huanxi Road , Jinqing Town, Xihu (West Lake) Dis. District, Tatizhou City, ZHangZhoug Province,P.R.China /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: Variable Speed
Number of Stator: Single-Phase
Function: Driving
Casing Protection: Closed Type
Number of Poles: 20 54
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

How to Calculate Gear Ratio in a Gearbox

Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:

Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear

Here’s a step-by-step guide on how to calculate gear ratio:

  1. Identify the input and output gears in the gearbox.
  2. Count the number of teeth on the output gear (the gear connected to the output shaft).
  3. Count the number of teeth on the input gear (the gear connected to the input shaft).
  4. Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
  5. Calculate the gear ratio by performing the division.

The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.

China manufacturer High Torque 4 Series 80*80mm F1 type concentric square flange reducer Gear box For AC DC motor   automatic gearbox	China manufacturer High Torque 4 Series 80*80mm F1 type concentric square flange reducer Gear box For AC DC motor   automatic gearbox
editor by CX 2024-05-15

China Standard Cw18 Motor Grader Spare Parts Gearbox with Great quality

Product Description

We are China Top 1 Brand source factory accessories supplier, high quality, high matching degree,
more professional and more favorable price.

 

Part Name

Road Roller Gearbox

Part No.

CW18 , All model

Warranty

3 Months

Payment

TT/Paypal/Western Union

Delivery time

1-5 days

MOQ

1 Pc

Condition

100% New

1. WHO ARE WE?
HangZhou XIHU (WEST LAKE) DIS.NG ENGINEERING MACHINERY CO.,LTD is a leading construction machinery exporter,located in
HangZhou city,ZheJiang province where HangZhou Construction Machinery Group Inc in. We have the domestic agency rights
of them more than 10years,based on the advantage of them,we also estabish long-time business with other famous
brands.

2. HOW IS YOUR PRICE COMPARED WITH MANUFACTURERS/FACTORIES?
We work as the leading dealers of various leading China construction machinery manufacturers/ factories, and are
constantly treated with best dealership price. From numerous comparison and feedbacks from clients, our price is more
competitive than the price from manufacturers/factories.

3. HOW IS YOUR DELIVERY TIME?
In general circumstance, we can have an immediate delivery of regular machines for our clients within 7 days, because
we have a variety of resources to check machines in stock, locally and nation widely, and to receive machines in timely
manner. But for manufacturers/factories, it will take more than 30 days to produce the ordered machine.

4. HOW SOON CAN YOU RESPOND CLIENT INQUIRIES?
Our team is consisted of a group of diligent and dynamic people, working 247 to respond client inquiries and questions
all the time Most problems can be solved within 4 hours while manufacturers/factories will take much longer to give
response.

5. WHICH PAYMENT TERMS CAN YOU ACCEPT?
Normally we can work on T/T term or L/ term, sometime DP term.
1)On T/T term, 30% down payment is required in advance, and 70% balance shall be settled before shipment, or
against the copy of original B/L for long-term cooperating client.
2)On L/C term, a 100% irrevocable L/ C without “soft clauses”from an international recognized bank can be accepted.
Please seek the advice from the individual sales manager whom you work with.

6. WHAT SERVICES CAN WE PROVIDE?
Accepted Delivery Terms: FOB,CFR,CIF;
Accepted Payment Currency:USD,EUR;
Accepted Payment Type: T/T,L/C,Western Union,Cash;
Language Spoken:English,Chinese

7. WHAT PRODUCTS YOU CAN GET FROM US?
Our main products including,wheel loader,backhoe loader,truck crane,crawler crane,tower crane,road roller,motor
grader,excavator,bulldozer,forklift,dump truck,trailer,tractor truck,special vehicle ,Marine Machinery and all of their
spare parts.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Global Warranty
Warranty: 1 Year
Type: Road Roller Gearbox
Samples:
US$ 2599/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gearbox

Can I Use Synthetic Oil in My Gearbox?

Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:

  • Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
  • Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
  • Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
  • Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
  • Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
  • Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
  • Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.

However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.

China Standard Cw18 Motor Grader Spare Parts Gearbox   with Great quality China Standard Cw18 Motor Grader Spare Parts Gearbox   with Great quality
editor by CX 2024-05-14

China factory Desboer Ndr 110 Series Ratio 4-20: 1 Hight Precision Industry Right Angle Planetary Gearbox with Servo Motor gearbox adjustment

Product Description

Product Description

The NDR110 series planetary gearboxes are designed and machined as a single unit with special tapered roller bearings to provide high radial load, high torque, ultra-precision, and small size. The ND series uses in highly rigid industries such as fiber optic laser equipment, floor track equipment, robot seventh axis, Parallel robots (spider hand) machine tools, and rotating arms.
Product Name: High Precision Planetary Reducer
Product Series: NDR110 Series
Product features: high torque, high load, ultra-precision, small size
Product Description:
Integrated design concept with high-strength bearings ensure the product itself is durable and efficient
A variety of output ideas such as shaft output, flange and gear are available.
1 arc minute ≤ backlash ≤ 3 arc minutes
Reduction ratios ranging from 3 to 100
Frame design: increases torque and optimizes power transmission
Optimised selection of oil seals: reduces friction and laminate transmission efficiency
Protection class IP65
Warranty: 2 years

Our Advantages

High torque
High load
ultra-precision
Small size

Detailed Photos

 

Product Parameters

Segment number Single segment
Ratio i 4 5 7 10 14 20
Rated output torque Nm 250 310 280 210 280 210
Emergency stop torque Nm Three times of Maximum Output Torque
Rated input speed Rpm 4000
Max input speed Rpm 8000
Ultraprecise backlash arcmin ≤2
Precision backlash arcmin ≤4
Standard backlash arcmin ≤6
Torsional rigidity Nm/arcmin 82
Max.bending moment Nm 430
Max.axial force N 2990
Service life hr 30000(15000 under continuous operation)
Efficiency % ≥95%
Weight kg 10.5
Operating Temperature ºC -10ºC~+90ºC
Lubrication   Synthetic grease
Protection class   IP64
Mounting Position   All directions
Noise level(N1=3000rpm,non-loaded) dB(A) ≤68
Rotary inertia Kg·cm² 6.84 6.25

Applicable Industries

 

                              Packaging   Machinery                              Mechanical  Hand                                                         Textile  Machinery

                   Non  Standard  automation                                          Machine  Tool                                                       Printing   Equipment

Certifications

 

 

Company Profile

 

DESBOER (HangZhou) Transmission Technology Co., Ltd. is a subsidiary of DESBOER (China), which is committed to the design, development, customized production and sales of high precision planetary reducer as 1 of the technology company. Our company has over 10 years of design, production and sales experience, the main products are the high precision planetary reducer, gear, rack, etc., with high quality, short delivery period, high cost performance and other advantages to better serve the demand of global customers. It is worth noting that we remove the intermediate link sale from the factory directly to customers, so that you can get the most ideal price and also get our best quality service simultaneously.

 

About Research

In order to strengthen the advantages of products in the international market, the head company in Kyoto, Japan to established KABUSHIKIKAISYA KYOEKI, mainly engaged in the development of DESBOER high precision planetary reducer, high precision of transmission components such as the development work, to provide the most advanced design technology and the most high-quality products for the international market.

 

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Marine, Agricultural Machinery, CNC Machine
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Plantery Type
Hardness: Hardened Tooth Surface
Installation: All Directions
Step: Single-Step
Customization:
Available

|

Customized Request

gearbox

How to Calculate Gear Ratio in a Gearbox

Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:

Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear

Here’s a step-by-step guide on how to calculate gear ratio:

  1. Identify the input and output gears in the gearbox.
  2. Count the number of teeth on the output gear (the gear connected to the output shaft).
  3. Count the number of teeth on the input gear (the gear connected to the input shaft).
  4. Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
  5. Calculate the gear ratio by performing the division.

The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.

China factory Desboer Ndr 110 Series Ratio 4-20: 1 Hight Precision Industry Right Angle Planetary Gearbox with Servo Motor   gearbox adjustment	China factory Desboer Ndr 110 Series Ratio 4-20: 1 Hight Precision Industry Right Angle Planetary Gearbox with Servo Motor   gearbox adjustment
editor by CX 2024-05-10

China wholesaler Ratio 15/20/25/35/40/45/50/60/70/80/90/100: 10 60 Length Transmission Nb Series Planetary Gearbox Helical Gearbox for Servo Motor bevel gearbox

Product Description

Product Description

The NB060A series planetary gearboxes are designed and machined as a single unit with special tapered roller bearings to provide high radial load, high torque, ultra-precision, and small size. The ND series uses in highly rigid industries such as fiber optic laser equipment, floor track equipment, robot seventh axis, Parallel robots (spider hand) machine tools, and rotating arms.
Product Name: High Precision Planetary Reducer
Product Series: NB060A Series
Product features: high torque, high load, ultra-precision, small size
Product Description:
Integrated design concept with high-strength bearings ensure the product itself is durable and efficient
A variety of output ideas such as shaft output, flange and gear are available.
1 arc minute ≤ backlash ≤ 3 arc minutes
Reduction ratios ranging from 3 to 100
Frame design: increases torque and optimizes power transmission
Optimised selection of oil seals: reduces friction and laminate transmission efficiency
Protection class IP65
Warranty: 2 years

Our Advantages

High torque
High load
ultra-precision
Small size

Detailed Photos

Product Parameters

 

Segment number Double segment
Ratio i 15 20 25 30 35 40 45 50 60 70 80 90 100
Rated output torque Nm 50 45 55 50 45 40 35 55 50 45 40 35 35
Emergency stop torque Nm Three times of Maximum Output Torque
Rated input speed Rpm 5000
Max input speed Rpm 10000
Ultraprecise backlash arcmin /
Precision backlash arcmin ≤5
Standard backlash arcmin ≤7
Torsional rigidity Nm/arcmin 7
Max.bending moment Nm 1530
Max.axial force N 765
Service life hr 20000(10000 under continuous operation)
Efficiency % ≥94%
Weight kg 1.9
Operating Temperature ºC -10ºC~+90ºC
Lubrication   Synthetic grease
Protection class   IP64
Mounting Position   All directions
Noise level(N1=3000rpm,non-loaded) dB(A) ≤60
Rotary inertia Kg·cm² 0.13

Applicable Industries

 

                              Packaging   Machinery                              Mechanical  Hand                                                         Textile  Machinery

                   Non  Standard  automation                                          Machine  Tool                                                       Printing   Equipment

Certifications

 

 

Company Profile

 

DESBOER (HangZhou) Transmission Technology Co., Ltd. is a subsidiary of DESBOER (China), which is committed to the design, development, customized production and sales of high precision planetary reducer as 1 of the technology company. Our company has over 10 years of design, production and sales experience, the main products are the high precision planetary reducer, gear, rack, etc., with high quality, short delivery period, high cost performance and other advantages to better serve the demand of global customers. It is worth noting that we remove the intermediate link sale from the factory directly to customers, so that you can get the most ideal price and also get our best quality service simultaneously.

 

About Research

In order to strengthen the advantages of products in the international market, the head company in Kyoto, Japan to established KABUSHIKIKAISYA KYOEKI, mainly engaged in the development of DESBOER high precision planetary reducer, high precision of transmission components such as the development work, to provide the most advanced design technology and the most high-quality products for the international market.

 

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Marine, Agricultural Machinery, CNC Machine
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Plantery Type
Hardness: Hardened Tooth Surface
Installation: All Directions
Step: Double-Step
Customization:
Available

|

Customized Request

gearbox

Steps to Replace a Faulty Gearbox in an Automobile

Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:

  1. Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
  2. Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
  3. Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
  4. Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
  5. Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
  6. Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
  7. Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
  8. Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
  9. Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
  10. Lower Engine: Carefully lower the engine back into its original position if it was suspended.
  11. Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
  12. Final Check: Double-check all connections and ensure that all components are properly secured.
  13. Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
  14. Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.

It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.

China wholesaler Ratio 15/20/25/35/40/45/50/60/70/80/90/100: 10 60 Length Transmission Nb Series Planetary Gearbox Helical Gearbox for Servo Motor   bevel gearbox	China wholesaler Ratio 15/20/25/35/40/45/50/60/70/80/90/100: 10 60 Length Transmission Nb Series Planetary Gearbox Helical Gearbox for Servo Motor   bevel gearbox
editor by CX 2024-05-10

China Hot selling Coaxial Gearboxes R Series With Motor gearbox design

Product Description

R series Helical Geared Motor Characteristics

1. Features:

1. High efficiency: 92%-97%;

 

2. Compact structure: Small offset output, two stage and three stage are in the same box.

 

3. High precision: the gear is made of high-quality alloy steel forging, carbonitriding and hardening treatment, grinding process to ensure high precision and stable running.

4. High interchangeability: highly modular, serial design, strong versatility and interchangeability.

2. Technical parameters

Ratio 3.41-289.74
Input power 0.12-160KW
Output torque 61-23200N.m
Output speed 5-415rpm
Mounting type Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, CHINAMFG flange mounted, Flange-mounted with extended bearing hub
Input Method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor
Brake Release HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position)
Thermistor TF(Thermistor protection PTC thermisto)
TH(Thermistor protection Bimetal swotch)
Mounting Position M1, M2, M3, M4, M5, M6
Type R17-R167
Output shaft dis. 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing material HT200 high-strength cast iron from R37,47,57,67,77,87
Housing material HT250 High strength cast iron from R97 107,137,147,157,167,187
Heat treatment technology carbonitriding and hardening treatment
Efficiency 92%-97%
Lubricant VG220
Protection Class IP55, F class

Starshine Drive

ZheJiang CHINAMFG Drive Co.,Ltd,the predecessor was a state-owned military mould enterprise, was established in 1965. CHINAMFG specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
CHINAMFG have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our Team

Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective 
measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
 found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of 
customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the 
product is a product inspection to determine the qualified products.

7. Certification.

Packing

Delivery

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Agricultural Machinery, Ceramic
Hardness: Hardened Tooth Surface
Installation: Vertical or Horizontal
Layout: Coaxial
Gear Shape: Helical Gear
Step: Double or Three Steps
Customization:
Available

|

Customized Request

gearbox

Steps to Replace a Faulty Gearbox in an Automobile

Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:

  1. Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
  2. Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
  3. Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
  4. Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
  5. Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
  6. Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
  7. Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
  8. Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
  9. Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
  10. Lower Engine: Carefully lower the engine back into its original position if it was suspended.
  11. Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
  12. Final Check: Double-check all connections and ensure that all components are properly secured.
  13. Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
  14. Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.

It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.

China Hot selling Coaxial Gearboxes R Series With Motor   gearbox design		China Hot selling Coaxial Gearboxes R Series With Motor   gearbox design
editor by CX 2024-05-09

China factory High Carrying Ability RV Series AC Motor Sterling Worm Gear Reducer with high quality

Product Description

Why Choose Us

Product Details

Type

Worm Gear Speed Reducer/ gearbox

Model

WMRV 25/30/40/50/63/75/90/110/130/150/185

Ratio

7.5,10,15,20,25,30,40,50,60,80,100.

Color

Blue(RAL5571)/Silver grey (K9149) Or On Customer Request

Material

Housing: Aluminum alloy(size 25~90) / Cast iron(size 110~185)

Worm wheel: Aluminum Bronze or Tin Bronze

Worm shaft: 20CrMn Ti

Output Shaft: steel-45#

Packing

Carton, Honey Comb Carton, Wooden Case with wooden pallet
Warranty 1 Year
Input Power 0.09kw,0.18kw,1.1KW,1.5KW,2.2KW,3KW,4KW,5.5KW,7.5KW,11Kw and so on.
Usages Industrial Machine: Food Stuff, Ceramics, CHEMICAL, Packing, Dyeing,Wood working, Glass.
IEC Flange IEC standard flange or on customer request
Lubricant Synthetic oil or worm gear oil

 

 

Company Profile

Exhibition

Customized Service

Certificate&Honor

Customer Comments

FAQ

1. How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.

2. What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor information etc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.

3. What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.

4. Do you sell motors?
We have stable motor suppliers who have been cooperating with us for a long-time. They can provide motors
with high quality.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Function: Distribution Power, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Samples:
US$ 25/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gearbox

Is it Better to Repair or Replace a Damaged Gearbox?

Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:

  • Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
  • Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
  • Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
  • Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
  • Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
  • Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
  • Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.

Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.

China factory High Carrying Ability RV Series AC Motor Sterling Worm Gear Reducer   with high quality China factory High Carrying Ability RV Series AC Motor Sterling Worm Gear Reducer   with high quality
editor by CX 2024-05-08

China manufacturer Electric Worm Speed Gear Box for AC Electric Motor Speed Reducer gearbox engine

Product Description

3 Phase AC Reducer Motor 1/2hp 220V 380V 400W Gear Precision Foot Mounted Reducer Motor

CV and CH series motor can be designed as Single phase and 3 phases type. And power range is from 0.1KW to 3.7KW. The motor can be mounted with brake, and brake type is No excitation type. Material of gears is advanced special alloy steel and all gears are carburizing hardening. This gear motor has been added with senior lubricants, and no needs to added lubricants again.

Helical gear reducer has the characteristics of strong versatility, good combination, and strong bearing capacity, and has the advantages of easy access to various transmission ratios, high efficiency, small vibration, and high allowable axial and radial loads.

This series of products can not only be used in combination with various reducers and vibrators to meet the requirements, but also has the advantage of localization of related transmission equipment.
 

Mostly used in metallurgy, sewage treatment,chemical, pharmaceutical and other industries.

 

Type CH series  three phase or single phase ac motors for industrial use 
Voltage 220VAC, 380VAC, 415VAC
Power range Power range is 0.1KW to 3.7KW
Output Speed Speed range is from 7rpm to 500rpm
Phase Single phase and 3phases for choice
Gears Special alloy steel and high precise gears
Grease Good grease and no need add grease during using
Cooling Full closed fan
USE This motor is widely used in
packing machine, textil machine
motor is widely used in mix 
machine,elevator, conveyor,etc.
OEM Service We offer OEM service.

  

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Bevel Gear
Step: Three-Step
Samples:
US$ 70/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

How to Choose the Right Gearbox for Your Machinery

Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:

  1. Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
  2. Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
  3. Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
  4. Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
  5. Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
  6. Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
  7. Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
  8. Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
  9. Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
  10. Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
  11. Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.

Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.

China manufacturer Electric Worm Speed Gear Box for AC Electric Motor Speed Reducer   gearbox engineChina manufacturer Electric Worm Speed Gear Box for AC Electric Motor Speed Reducer   gearbox engine
editor by CX 2024-05-06

China manufacturer Nmrv Worm Gearbox with Brushless DC Gear Motor Speed Reducer gearbox design

Product Description

NMRV Worm Gearbox with Brushless DC Gear Motor Speed Reducer

 

Company Product Portfolio

1. AC gear motor
2. DC & BLDC gear motor
3. Worm gearbox
4. Helical gearbox
5. Coreless motor
6. PM Synchronous Motor
7. Motor controller
8. Customized motor

If you are looking for motors and gearboxes, please tell us about your requirement. We will choose a most suitable or customized drive solution for you.

Company Overview
  

Certificates

About Greensky Mechanical
 
HISTORY: Greensky is a mechanical brand of CHINAMFG Power Co., Ltd. With over 10 years’
mechanical manufacturing experiences, CHINAMFG Power always strictly stands on the
principle of Best Customer Satisfaction.

QUALITY: Material Inspection, Production Control, Finished Goods Test, Pre-dellivery Inspection

MISSION: “Once and forever” is our goal to serve customers in the world. Once we do
business with customer, we will do business forever.

MARKET30 different countries, mainly Germany, Austria, Japan, USA and Middle-East.

DELIVERY100% on-time delivery Guaranteed.

SERVICESFast response in English, German, Japanese and Chinese languages.

OEMCustomized orders are welcome at CHINAMFG Power.

Exhibitions

FAQ

1 Q: What’s your MOQ for gearboxes and motors?
   A: 1unit is ok for different types. 

2 Q: What about your warranty for your gearboxes and motors?
   A: One year.

3 Q: Do you provide OEM service with customer-logo?
   A: Yes, we could do OEM orders, but we mainly focus on our own brand.

4 Q: How about your payment terms ?
   A: TT, western union and paypal. 100% payment in advanced for orders less $5,000. 30% deposit and balance before delivery for orders over $5,000.

5 Q: How about your packing ?
   A: Carton, Plywood case. If you need more, we can pack all goods with pallet 

6 Q: What information should be given, if I buy gear motor from you ?
   A: Rated power, gearbox ratio, input speed, mounting position. More details, better!

7 Q: How do you deliver the gearboxes and motors?
   A: We will compare and choose the most suitable ways of delivery by sea, air or express courier.

We hope you will enjoy cooperating with us.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Marine, Agricultural Machinery, Equipment
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Bevel Gear
Step: Double-Step
Samples:
US$ 55/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Benefits of Regular Gearbox Maintenance

Regular maintenance of gearboxes offers numerous advantages:

  • Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
  • Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
  • Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
  • Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
  • Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
  • Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
  • Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
  • Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
  • Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.

Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.

China manufacturer Nmrv Worm Gearbox with Brushless DC Gear Motor Speed Reducer   gearbox design		China manufacturer Nmrv Worm Gearbox with Brushless DC Gear Motor Speed Reducer   gearbox design
editor by CX 2024-05-03

China manufacturer Professional Production High Efficiency Metric Worm Gear Reducers Electric Motor Gearbox comer gearbox

Product Description

Why Choose Us

Product Details

Type

Worm Gear Speed Reducer/ gearbox

Model

WMRV 25/30/40/50/63/75/90/110/130/150/185

Ratio

7.5,10,15,20,25,30,40,50,60,80,100.

Color

Blue(RAL5571)/Silver grey (K9149) Or On Customer Request

Material

Housing: Aluminum alloy(size 25~90) / Cast iron(size 110~185)

Worm wheel: Aluminum Bronze or Tin Bronze

Worm shaft: 20CrMn Ti

Output Shaft: steel-45#

Packing

Carton, Honey Comb Carton, Wooden Case with wooden pallet
Warranty 1 Year
Input Power 0.09kw,0.18kw,1.1KW,1.5KW,2.2KW,3KW,4KW,5.5KW,7.5KW,11Kw and so on.
Usages Industrial Machine: Food Stuff, Ceramics, CHEMICAL, Packing, Dyeing,Wood working, Glass.
IEC Flange IEC standard flange or on customer request
Lubricant Synthetic oil or worm gear oil

 

 

Company Profile

Exhibition

Customized Service

Certificate&Honor

Customer Comments

FAQ

1. How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.

2. What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor information etc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.

3. What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.

4. Do you sell motors?
We have stable motor suppliers who have been cooperating with us for a long-time. They can provide motors
with high quality.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Function: Distribution Power, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Samples:
US$ 25/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gearbox

Is it Better to Repair or Replace a Damaged Gearbox?

Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:

  • Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
  • Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
  • Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
  • Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
  • Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
  • Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
  • Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.

Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.

China manufacturer Professional Production High Efficiency Metric Worm Gear Reducers Electric Motor Gearbox   comer gearbox	China manufacturer Professional Production High Efficiency Metric Worm Gear Reducers Electric Motor Gearbox   comer gearbox
editor by CX 2024-04-30