Product Description
MN Series Bonfiglioli, CHINAMFG Planetary Gear Box
1. Ratio range: 3.15-3000
2. Input power: 0.25-55KW
3. Permit torque rang: ≤200000N. m
4. Output speed: 0.425-445 r/min
Technical Parameter:
Output Torque Range: 1000 to 450,000 N.m
Transmissible Mechanical Power: up to 450 kW
Gear Ratios: 3 to 9000
Gear Unit Versions:
In line (Co-axial )
Right angle (with a spiral bevel gear set)
Output Configuration:
Foot and flange mounted
Output shaft: CHINAMFG with key, spline, spline hollow,
Hollow with shrink disc
Input Configurations
Flanged axial piston hydraulic motors
Hydraulic orbit motors
IEC and NEMA motor adaptors
Solid input shaft
Hydraulic Brake: Hydraulically released parking brake on request
|
Equivalent To Other Brand : |
|
|
Bonfiglioli |
300 Series |
|
Brevini |
EM/ED/ET/ET |
|
Dynamic oil |
RE Series |
|
REGGIANA RIDUTTOR |
RR Series |
Application:
N series planetary speed reducer is widely used for industrial applications. With the designs deriving from modern innovating, the product makes great progress in a compact, price effectiveness and combination. The product configuration is highly versatile due to several options as far as the mounting, the output shaft and the motor interface. With overloading bearing fixed to the output shaft, the products has been 1 of the powerful solutions to heavy-duty drive problems.
How To Select a Complete CHINAMFG planetary gearbox:
Complete planetary gearbox made up of 4 parts :
| A | |
| Input Component | |
| 1:AC electric motor | |
| 2: NEMA or IEC motor | |
| 3: NEMA or IEC motor adapter flange | |
| 4: the Solid input shaft | |
| 5: Solid input shaft with the fan | |
| B | |
| Gear Reductions (co-axial stage 1-5 ,right angle 1-4 . ) | |
| 6:Right angle reduction stage | |
| 7: Planetary reduction stage | |
| 8: Worm/planetary combination | |
| 9: Bevel helical planetary combination | |
| C | |
| Output Component | |
| 10: Flanged output/ Footed output-Solid shaft | |
| 11: Flanged output/ Footed output-Male spline shaft | |
| 12: Flanged output/ Footed output- Female spline shaft | |
| 13: Flanged output/ Footed output- | |
| 14: Flanged output/ Footed output-Pinion | |
| 15: Shaft Mount output for shrink disc | |
| D | |
| Fittings | |
| 16: Flange | |
| 17: Pinion gear | |
| 18: Sleeve coupling | |
| 19: Endplate | |
| 20: Splined bar | |
| 21: Shrink disc | |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Four-Step |
| Samples: |
US$ 5000/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2024-05-17
China Professional Foot Mounted High Torque Planetary Gearbox components of gearbox
Product Description
Foot Mounted High Torque Planetary Gearbox
Product description:
| Rated Power | 0.4KW~9551KW |
| Rated Torque | Up to 1920KN.m |
| Gear Arrangement | Planetary with helical or bevel gearbox |
| Input Speed | 50HZ or 60HZ of 4Pole,6Pole and 8pole motor |
| Ratio | i=25~4000 |
| Installation Form | Flange Mounted, Foot Mounted or Torque Arm Mounted |
P Series Planetary Gearbox adopts the involute planetary gear transmission with inner mesh, outer mesh and divided power employed reasonably. So the series has the features of light weight, small volume, high transmission ratio, high efficiency, smooth rotation, low noise and good applicability.
Application:
P Series Planetary Gearbox is widely used in many industries such as metallurgy, mining, hoisting and transportation, electrical power, energy resources, construction and building materials, light industry and traffic, etc.
P series planetary gearbox with good prices
1.P Series Planetary Gear Units is designed according to the involute planetary gear transmission with inner mesh,outer mesh and divided power employed reasonably.
2.P series planetary gear unit has the feature of light weight , small volume, high transmission ratio,
high efficiency, smooth rotation, low noise and good applicability.
3.P series is widely used in industries such as metallurgy, mining, hoisting and transportation, electrical power, energy resources, construction and building materials, light industry and traffic.
4.Technical Data
| Input power | Ratio | Torque | Planetary gear units stage | Mounting type |
| 0.4~9551kW | 25~4000 | Up to 1920000N.m | 2 stage 3 stage |
Horizontal Vertical |
5.Basic Information
Gear Arrangement:Helical gear
Mounting Type: Horizontal, Vertical
Types: P2N,P2L,P2S,P2K,P3N,P3S,P3K
6.Features
| Features of Planetary gearbox | Light weight |
| Small volume | |
| High transmission ratio | |
| High transmission efficiency | |
| Smooth rotation | |
| Good applicability |
P series planetary gearbox with good prices
7.Explanation of types
P2N-2-stage planetary gear units:
P2L-Bevel,2-stage planetary gear units:
P2S-Helical,2-stage planetary gear units;
P2K-Bevel-helical,2-stage planetary gear units:
P3N-3-stage planetary gear units;
P3S-Helical,3-stage planetary gear units;
P3K-Bevel-helical,3-stage planetary gear units;
8.Our Services:
| Pre-sale services | 1. Select equipment model. |
| 2.Design and manufacture products according to clients’ special requirement. | |
| 3.Train technical personal for clients | |
| Services during selling | 1.Pre-check and accept products ahead of delivery. |
| 2. Help clients to draft solving plans. | |
| After-sale services | 1.Assist clients to prepare for the first construction scheme. |
| 2. Train the first-line operators. | |
| 3.Take initiative to eliminate the trouble rapidly. | |
| 4. Provide technical exchanging. |
9.Product picture:
10.Our company :
AOKMAN was founded in 1982, which has more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare parts.
We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with a strong presence in the international market.
AOKMAN has become a reliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.
11.Customer visiting:
12.FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set
Welcome you contact me if you are interested in our product.
Our team will support any need you might have. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery, Industry |
|---|---|
| Function: | Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Parallel Shaft |
| Hardness: | Hardened |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Customization: |
Available
| Customized Request |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2024-05-17
China manufacturer ZD High Efficiency Speed 3-200K Reduction Ratio Helical Precision Planetary Gearbox bevel gearbox
Product Description
Model Selection
Planetar y gearbox is a kind of reducer with wide versatility. The inner gear adopts low carbon alloy steel carburizing quenching and grinding or nitriding process. Planetary gearbox has the characteristics of small structure size, large output torque, high speed ratio, high efficiency, safe and reliable performance, etc. The inner gear of the planetary gearbox can be divided into spur gear and helical gear.
• Model Selection
Our professional sales representive and technical team will choose the right model and transmission solutions for your usage depend on your specific parameters.
• Drawing Request
If you need more product parameters, catalogues, CAD or 3D drawings, please contact us.
• On Your Need
We can modify standard products or customize them to meet your specific needs.
Range Of Planetary Gearbox
Other Products
Company Profile
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Change Drive Torque, Speed Changing, Speed Reduction |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Type: | Planetary Gear Box |
| Size: | 60mm-160mm |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can I Use Synthetic Oil in My Gearbox?
Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:
- Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
- Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
- Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
- Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
- Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
- Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
- Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.
However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.
editor by CX 2024-05-16
China Best Sales Advance Marine Gearbox Hcd138 Is Suitable for Transport and Passenger Boats. with Great quality
Product Description
Advance Marine Gearbox HCD138 is suitable for medium and small fishing, transport, tug, transport and passenger boats.
Marine Gearbox HCD138 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in large in ratio, small in volume and light in weight.
| Input speed | 1000-2500r/min | ||
| Reduction ratio | 5.05,5.63 | Trans. capacity | 0.110kw/r/min |
| 6.06 | 0.099kw/r/min | ||
| 6.47 | 0.093kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 40KN | ||
| Center distance | 296mm | ||
| L×W×H | 494×800×870mm | ||
| Net weight | 415kg | ||
| Flywheel | 6135Ca,SAE14,11.5 | ||
| Bell housing | 6135Ca,SAE1,2 | ||
Marine Gearbox HCD1000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1900r/min | ||
| Reduction ratio | 3.429,3.96,4.391,4.45,4.905,5.06 | Trans. capacity | 0.735kw/r/min |
| 5.474 | 0.68kw/r/min | ||
| 5.833 | 0.65kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 450mm | ||
| L×W×H | 1082*1280*1345mm | ||
| Net weight | 1900kg | ||
| Flywheel | SAE21,18 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HC600A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and light in weight.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 2.00,2.48,3.00 | Trans. capacity | 0.48kw/r/min |
| 3.58 | 0.44kw/r/min | ||
| 3.89 | 0.40kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 90KN | ||
| Center distance | 320mm | ||
| L×W×H | 745*1094*1126mm | ||
| Net weight | 1300kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HC400 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and high in loading capacity.
| Input speed | 1000-1800r/min | ||
| Reduction ratio | 1.50,1.77,2.04,2.50,2.86,3.00,3.42 | Trans. capacity | 0.331kw/r/min |
| 4.06 | 0.279 kw/r/min | ||
| 4.61,4.94 | 0.190 kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 82KN | ||
| Center distance | 264mm | ||
| L×W×H | 641×950×890mm | ||
| Net weight | 820kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE0,1 | ||
Marine Gearbox HC300 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, and light in weight.
| Input speed | 700-2500r/min | ||
| Reduction ratio | 1.5,1.87,2.04,2.23,2.54,3,3.53 | Trans. capacity | 0.257kw/r/min |
| 4.1,4.47 | 0.2kw/r/min | ||
| 4.61 | 0.184kw/r/min | ||
| 4.94 | 0.147kw/r/min | ||
| 5.44 | 0.13kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 50KN | ||
| Center distance | 264mm | ||
| L×W×H | 680×930×880mm | ||
| Net weight | 680kg | ||
| Flywheel | 12V135,12V150,SAE18,16,14 | ||
| Bell housing | 12V135,12V150,SAE0,1 | ||
Marine Gearbox HC138 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and large in ratio.
| Input speed | 1000-2500r/min | ||
| Reduction ratio | 2.0,2.52,3.00,3.57,4.05,4.45 | Trans. capacity | 0.110kw/r/min |
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 30KN | ||
| Center distance | 225mm | ||
| L×W×H | 520×792×760mm | ||
| Net weight | 360kg | ||
| Flywheel | 6135Ca,SAE14,11.5 | ||
| Bell housing | 6135Ca,SAE1,2,3 | ||
Marine Gearbox HC1250 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, and easy in dismantle & reassemble and maintain.
| Input speed | 400-1800r/min | ||
| Reduction ratio | 2.032,2.481,3.043,3.476 | Trans. capacity | 0.919kw/r/min |
| 3.947 | 0.850kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 390mm | ||
| L×W×H | 1155x1330x1435mm | ||
| Net weight | 2200kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | No | ||
Marine Gearbox HC1200 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, and easy in dismantle & reassemble and maintain.
|
Input speed |
600-1900r/min |
||
|
Reduction ratio |
1.6,2.03,2.476,2.5,2.96,3.55 |
Trans. capacity |
0.93kw/r/min |
|
3.79 |
0.88kw/r/min |
||
|
4.05 |
0.80kw/r/min |
||
|
4.20 |
0.695kw/r/min |
||
|
4.47 |
0.650kw/r/min |
||
| Control way |
Push-and-pull flexible shaft, electrically, pneumatically |
||
| Rated thrust |
120KN |
||
| Center distance |
380mm |
||
| L×W×H |
1082x1200x1130mm |
||
| Net weight |
2000kg |
||
| Flywheel |
Depend on engine flywheel |
||
| Bell housing |
SAE00 0 |
||
Marine Gearbox HC1200/1 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and easy in dismantle & reassemble and maintain.
| Input speed | 600-1800r/min | ||
| Reduction ratio | 3.74,3.95,4.45 | Trans. capacity | 0.93kw/r/min |
| 5 | 0.833kw/r/min | ||
| 5.25 | 0.695kw/r/min | ||
| 5.58 | 0.65kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 450mm | ||
| L×W×H | 1096x1260x1270mm | ||
| Net weight | 2500kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | SAE00 0 | ||
Marine Gearbox HC1000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure and easy in dismantle & reassemble and maintain.
| Input speed | 600-1900r/min | ||
| Reduction ratio | 2,2.5,3.04,3.48 | Trans. capacity | 0.735kw/r/min |
| 4.06 | 0.65kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 110KN | ||
| Center distance | 335mm | ||
| L×W×H | 1082x1120x990mm | ||
| Net weight | 1700kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox 40A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and light in weight.
| Input speed | 750-2000r/min | ||
| Reduction ratio | 2.07,2.96 | Trans. capacity | 0.030kw/r/min |
| 3.44 | 0.571kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically | ||
| Rated thrust | 8.8KN | ||
| Center distance | 142mm | ||
| L×W×H | 490×670×620mm | ||
| Net weight | 225kg | ||
| Flywheel | 4110C,SAE14,11.5 | ||
| Bell housing | 4110C,SAE1,2,3 | ||
Marine Gearbox 26 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is mechanically controlled, featuring in small in volume and light in weight.
| Input speed | 1000-2500r/min | ||
| Reduction ratio | 2.5,3 | Trans. capacity | 0.0199kw/r/min |
| 3.5 | 0.0190kw/r/min | ||
| 4 | 0.0177kw/r/min | ||
| Control way | Manually | ||
| Rated thrust | 5KN | ||
| Center distance | 135mm | ||
| L×W×H | 473.5×365×830mm | ||
| Net weight | 92kg | ||
| Flywheel | 4105C | ||
| Bell housing | 4105C | ||
Marine Gearbox 16A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is mechanically controlled, featuring in small in volume and light in weight.
.
| Input speed | 1000-2000r/min | ||
| Reduction ratio | 2.07,2.48,2.95,3.35,3.83 | Trans. capacity | 0.012kw/r/min |
| Control way | Manually | ||
| Rated thrust | 3.5KN | ||
| Center distance | 135mm | ||
| L×W×H | 422×325×563mm | ||
| Net weight | 84kg | ||
| Flywheel | 2105C 395,SAE11.5,10 | ||
| Bell housing | 2105C 395,SAE3,4 | ||
Marine Gearbox 135 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and easy in dismantle & reassemble and maintain.
| Input speed | 750-2000r/min | ||
| Reduction ratio | 2.03,2.59,3.04,3.62,4.11 | Trans. capacity | 0.10kw/r/min |
| 4.65 | 0.093kw/r/min | ||
| 5.06 | 0.088kw/r/min | ||
| 5.47 | 0.077kw/r/min | ||
| 5.81 | 0.070kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically | ||
| Rated thrust | 29.4KN | ||
| Center distance | 225mm | ||
| L×W×H | 578×744×830mm | ||
| Net weight | 470kg | ||
| Flywheel | 6135Ca,SAE14 | ||
| Bell housing | 6135Ca,SAE1 | ||
Marine Gearbox 120B possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and easy in dismantle & reassemble and maintain.
| Input speed | 750-1800r/min | ||
| Reduction ratio | 2.03,2.81 | Trans. capacity | 0.088kw/r/min |
| 3.73 | 0.044kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically | ||
| Rated thrust | 25KN | ||
| Center distance | 190mm | ||
| L×W×H | 605×744×770mm | ||
| Net weight | 400kg | ||
| Flywheel | 6135Ca,4120,SAE14 | ||
| Bell housing | 6135Ca,4120,SAE1 | ||
Marine Gearbox 06 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is mechanically controlled, featuring in small in volume and light in weight.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 2.52,3.05,3.50 | Trans. capacity | 0.004kw/r/min |
| Control way | Manually | ||
| Rated thrust | 1.8KN | ||
| Center distance | 124mm | ||
| L×W×H | 350×316×482mm | ||
| Net weight | 58kg | ||
| Flywheel | 195C | ||
| Bell housing | 195C | ||
ADVANCE Marine Gearbox D300A is suitable for fishing, tug, engineering and transport boats
Marine Gearbox D300A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and easy in dismantle & reassemble and maintain.
Marine Gearbox 300 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and easy in dismantle & reassemble and maintain.
| Input speed | 1000-2500r/min | ||
| Reduction ratio | 4.00 | Trans. capacity | 0.257kw/r/min |
| 4.48 | 0.243kw/r/min | ||
| 5.05 | 0.221kw/r/min | ||
| 5.52,5.90 | 0.184kw/r/min | ||
| 6.56,7.06 | 0.147kw/r/min | ||
| 7.63 | 0.125kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 60KN | ||
| Center distance | 355mm | ||
| L×W×H | 786×980×1041mm | ||
| Net weight | 940kg | ||
| Flywheel | 12V135,SAE18,16,14 | ||
| Bell housing | 12V135,SAE0,1 | ||
| Input speed | 750-2500r/min | ||
| Reduction ratio | 1.87,2.04,2.54 | Trans. capacity | 0.257kw/r/min |
| 3.00 | 0.243kw/r/min | ||
| 3.53 | 0.221kw/r/min | ||
| 4.10,4.47,4.61 | 0.184kw/r/min | ||
| 4.94 | 0.147kw/r/min | ||
| 5.44 | 0.125kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 50KN | ||
| Center distance | 264mm | ||
| L×W×H | 786×930×864mm | ||
| Net weight | 740kg | ||
| Flywheel | 12V135,12V150,SAE18,16,14 | ||
| Bell housing | 12V135,12V150,SAE0,1
|
||
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Marine |
|---|---|
| Function: | Speed Reduction |
| Layout: | Cycloidal |
| Hardness: | Soft Tooth Surface |
| Installation: | Oscillating Base Type |
| Step: | Double-Step |
| Customization: |
Available
| Customized Request |
|---|
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2024-05-16
China Good quality F Series Helical Parallel Gearbox with IEC Motor gearbox design
Product Description
F series Parallel Shaft-Helical Geared Motor Characteristics
1.Features:
- High efficiency: 92%-94%;
- Parallel output, compact structure, large output torque, smooth operation, low noise and long service life.
- High precision: the gear is made of high-quality alloy steel forging, carbonitriding and hardening treatment, grinding process to ensure high precision and stable running.
- High interchangeability: highly modular, serial design, strong versatility and interchangeability.
2. Technical parameters
| Ratio | 3.77-276.77 |
| Input power | 0.12-200KW |
| Output torque | 3.5-21700N.m |
| Output speed | 5-352rpm |
| Mounting type | Foot mounted, foot mounted with CHINAMFG shaft, output flange mounted, hollow shaft mounted, B5 flange mounted with hollow shaft, foot mounted with hollow shaft, B14 flange mounted with hollow shaft, foot mounted with splined hole, foot mounted with shrink disk, hollow shaft mounted with anti-torque arm. |
| Input Method | Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor |
| Brake Release | HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position) |
| Thermistor | TF(Thermistor protection PTC thermisto) TH(Thermistor protection Bimetal swotch) |
| Mounting Position | M1, M2, M3, M4, M5, M6 |
| Type | F37-F157 |
| Output shaft dis. | 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm |
| Housing material | HT200 high-strength cast iron from R37,47,57,67,77,87 |
| Housing material | HT250 High strength cast iron from R97 107,137,147, 157,167,187 |
| Heat treatment technology | carbonitriding and hardening treatment |
| Efficiency | 92%-94% |
| Lubricant | VG220 |
| Protection Class | IP55, F class |
Starshine Drive
ZheJiang CHINAMFG Drive Co.,Ltd,the predecessor was a state-owned mould enterprise, was established in 1965. CHINAMFG specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
CHINAMFG have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.
Our Team
Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective
measures to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of
customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the
product is a product inspection to determine the qualified products.
7. Certification.
All our products get ISO & CE & UL certification.
Packing
Delivery
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery, Marine, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Parallel Shaft |
| Layout: | Coaxial |
| Gear Shape: | Bevel Gear |
| Step: | Two Step or Three Step |
| Customization: |
Available
| Customized Request |
|---|
Common Problems with Gearboxes and How to Troubleshoot Them
Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:
- Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
- Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
- Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
- Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
- Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
- Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
- Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
- Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
- Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
- Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.
Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.
editor by CX 2024-05-16
China high quality Gears, Gear Shafts, Gearboxes Are on Sale planetary gearbox
Product Description
Product Description
Product Description
1) According to the different strength and performance, we choose the steel with strong compression;
2) Using Germany professional software and our professional engineers to design products with more reasonable size and better performance; 3) We can custom ize our products according to the needs of our customers,Therefore, the optimal performance of the gear can be exerted under different working conditions;
4) Quality assurance in every step to ensure product quality is controllable.
Product Parameters
| Parameters | Values |
| Application | Reducer |
| Maximum Diameter | 4000MM |
| Maximum Modulus | 55 |
| Max Tooth Surface Accuracy | 5 Degree |
Detailed Photos
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Customized: | Customized |
|---|---|
| Condition: | New |
| Certification: | ISO, CE |
| Maximum Diameter: | 4000mm |
| Maximum Modulus: | 55 |
| Max Tooth Surface Accuracy: | 5 Degree |
| Customization: |
Available
| Customized Request |
|---|
How to Calculate Gear Ratio in a Gearbox
Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:
Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear
Here’s a step-by-step guide on how to calculate gear ratio:
- Identify the input and output gears in the gearbox.
- Count the number of teeth on the output gear (the gear connected to the output shaft).
- Count the number of teeth on the input gear (the gear connected to the input shaft).
- Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
- Calculate the gear ratio by performing the division.
The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.
editor by CX 2024-05-15
China Standard Hot Selling 12as2330to Automatic 16s221 Wsk Manual Gearbox for Truck Transmission wholesaler
Product Description
Product Description
Overview
Compatible vehicles
| Car Fitment | Model | Year |
|---|---|---|
| SINOTRUK (CNHTC) | Hot selling 12AS2330TO Automatic 16s221 Wsk Manual Gearbox for Truck Transmission | 2 |
|
Serial No |
80032003 |
|
|
Total Ratio |
0.84-13.8 |
|
|
Speed Ratio |
IMP/U 6,00 |
|
|
Oil Capacity(L) |
15.5 |
|
|
Oil Grade See Lubric. List |
02 |
|
|
Quality |
High-Quality |
|
|
Packing |
Customers’ Requirement |
Packaging & delivery
Package Type:
According to international export standards or customized according to your requirements
Supply Ability
Supply Ability
1000 Piece/Pieces per Month
Detailed Photos
Product details
n
Company Profile
ZheJiang Yontan Import and Export Co., Ltd. was established in HangZhou, the capital of ZheJiang Province, a famous national historical and cultural city with profound heritage. The company is mainly engaged in the export of complete vehicles of SINOTRUC, HOWO, SHACMAN, FOTON, FAW, XIHU (WEST LAKE) DIS., XIHU (WEST LAKE) DIS.FENG and other brands. It is engaged in the export sales of a full range of truck accessories and assemblies. The products distributed by the company are mainly supplied to major domestic transportation units, oil and gas transportation teams, municipal engineering fleets and civil engineering fleets, as well as major foreign construction companies and transportation companies.
On the basis of the continuous development of the company’s business, we are committed to exploring the international market. So far, our market has covered China, Eastern Europe, the Middle East, Africa, Southeast Asia, South America and other countries and regions. Our integrity is everywhere and we are deeply trusted by customers. Our company has a large warehouse and a professional management team, which can quickly find suitable parts for customers, and can provide services such as good packaging, safe storage, and fast transportation to meet the diverse needs of customers at any time.
The company adheres to the concept of “integrity, CHINAMFG and sustainable”, and sincerely welcomes customers to come to our company to discuss business cooperation.
Company Profile
Certifications
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 24h Full Technical Support |
|---|---|
| Warranty: | 12 Months |
| Type: | Gearbox |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2024-05-15
China manufacturer High Torque 4 Series 80*80mm F1 type concentric square flange reducer Gear box For AC DC motor automatic gearbox
Product Description
Warm Tips
Please inquiry and confirm us before orders.
Company Profile
HangZhou CHINAMFG Industrial Co.,Ltd. is a Chinese manufacturer of servo motor, servo driver, small and medium gear reduction motor.Who has passed the ISO 9001 international Quality System Certification. Most of the products have got CE and CCC certifications. These products are sold all over the world such as the United States, Europe, Southeast Asia and Middle East,etc.
The core products are include the universal servo motor, servo driver, G1 series micro/small reduction motor (power:from 6W to 400W).Torque motor,L series Linear type reduction motor, F1 series orthogonal reduction motor, CB type gear reduction motor with electromagnetic clutch and brake, AC/DC speed controller and reduction motor accessories, GH,G3,G4 type medium reduction motor (Power :from 0.1kw to 3.7kw), the gear motors for poultry farm equipment, stainless steel thermostability long shaft motor, etc. They have been widely applied in the embroidery machine, CNC machine, packing machine, engraving machine, printing machinery, packing machinery, textile machinery, household appliances, etc.
We shall meet customer increasing demand.
We shall provide customer with our best service.
Certifications
Product Description
FAQ
1. Q: What is the warranty of your products?
A: All parts have a One-Year Warranty as long as it is within the warranty period and proof of purchase is avaliable. Improper use or installation is not a manufacturer’s defect.
2. Q: How long is your delivery time?
A: Generally, it is 3-7 business days if the goods are in stock or it is 7-15days if the goods are not in stock. It is according to customer’s quantity and request.
3. Q: What payment method can I use? And what’s your terms of payment?
A: We can accept Company Bank transfer and Western Union. For samples, it’s 100% T/T in advance. For orders, it’s 30% T/T in advance, and 70% balance before shipment.
4. Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide the sample, but the customer should pay for the cost. We could use FEDEX/ DHL/ TNT shipping, and it may take 5-7 business days.
Contact Information
INTERNATIONAL TRADE DEPARTMENT
ADD:No.188 Huanxi Road , Jinqing Town, Xihu (West Lake) Dis. District, Tatizhou City, ZHangZhoug Province,P.R.China /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Speed: | Variable Speed |
| Number of Stator: | Single-Phase |
| Function: | Driving |
| Casing Protection: | Closed Type |
| Number of Poles: | 20 54 |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How to Calculate Gear Ratio in a Gearbox
Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:
Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear
Here’s a step-by-step guide on how to calculate gear ratio:
- Identify the input and output gears in the gearbox.
- Count the number of teeth on the output gear (the gear connected to the output shaft).
- Count the number of teeth on the input gear (the gear connected to the input shaft).
- Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
- Calculate the gear ratio by performing the division.
The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.
editor by CX 2024-05-15
China Professional 3222 329 74/3222 3298 73/Gear Box for Atlas Drill Rig Dm45 Dm30 sequential gearbox
Product Description
//Gear Box For ATLAS Drill rig GFT13T2,GFT17T3,GFT24T3,GFT36T3,GFT50T3,GFT60T3,GFT110T3,GFT220T3,GFT330T3 weel drive speed reducer
CHINAMFG GEARBOX GFT 17 T2 3296 Planetary Gearbox Reducer for Travel Driving Device or Final Drive For Road rollerMachinery
1, good quality
2, low price, Original CHINAMFG motor reducer
3, deliver soon
Rexroth GFT13 GFT17 GFT36 GFT50 GFT60 GFT80 GFT24 GFT110 travel drive reducer
GFT110W3B115 Planetary Gearbox Reducer Technical parameters:
| GFT-T SERIES GEAR BOX REDUCER PARAMETERS: | |||||||
| Model: | GFT0017-T | GFT0571-T | GFT0026-T | GFT0036-T | GFT0060-T | GFT0080-T | GFT0110-T |
| Max.Output Torque(N.M) | 17000 | 24000 | 26000 | 36000 | 60000 | 80000 | 110000 |
| Speed Ratio | 54 | 102.6/120.5/137.2 | 50.5/62 | 115/138.8 | 105.5/119.8/139.9/169.9 | 99/126.9/215 | 95.8/114.8/173.9 |
| Recommended Motor | A6VE55 | A6VE55 | A6VE80 | A6VE55/A6VE80/A2FE80/90 | A6VE80/107/A2FE80/90 | A6VE107/160/A2FE107/125 | A6VE107/160/A2FE107/125 |
| Brake Torque(N.M) | 350 | 300 | 715 | 715 | 725 | 1571 | 1571 |
| Products Advantage: |
| Compact,space-saving planetary gearbox design |
| Planet wheel carried in full-complement bearings |
| Robust bearing system absorbing the forces exerted by the cable pull |
| Simple mounting |
| Integrated multiplate parking device |
| GFT-T reducer are used in all kinds of travel driving,final drive of construction machinery |
| Specification: | |
| Place of Origin | China |
| Type | Exactly same as Original |
| Deliery time | have in stock |
| Warranty | 1 year |
| Contact details: | |
Our company can produce CHINAMFG gearbox according to customer’ requirement.
HYDROTRAC GFT is an ideal driving component for wheel or track driving vehicles, and other moving equipment and widely applied in excavator, spreading machine, drill machine, mobile crusher, engineering machinery, mining, tunnel machinery, agricultural machinery, etc. Meanwhile, different motor connectors and dimensions are available on request. It is an ideal replacement of CHINAMFG products. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Layout: | Three-Ring |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Torque Arm Type |
| Step: | Three-Step |
| Type: | Planetary Gear Box |
| Manufacturing Method: | Cut Gear |
| Customization: |
Available
| Customized Request |
|---|
Different Types of Gearboxes and Their Applications
There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:
- Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
- Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
- Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
- Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
- Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
- Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
- Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.
Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.
editor by CX 2024-05-15
China factory Pmb6.5r120 Gearbox for Concrete Mixer 10m3 Drum supplier
Product Description
pmb6.5r120 gearbox for concrete mixer 10M3 drum
Elephant fluid power is specializing in the production and exporting of engineering construction hydraulic equipment components, hydraulic pumps, hydraulic motors, reducer gearbox, coolers, etc. We are committed to creating the highest-end quality and after-sales service. Very competitive price and high-end quality have won us more and more partners. Looking CHINAMFG to you joining us and establishing good long-term cooperation and benefits.
Concrete Mixer Truck PMP Hydraulic Gearbox
Model available as below
PMB 6 SP……PMB 6 CP….PMB 6.5 SP…….PMB 6.5 CP
PMB 7.1 SP…..PMB 7.1 CP…PMB 7.2 SP……PMB7.2 CP……PMB 7.8 SP…..PMB 7.8 CP..
PMB 8 SP……..PMB 8 CP…..PMB7R..PMB7.1 R…..PMB 7.8 R…..
with water pump connection or without water pump connection
The PMB6 is used on concrete mixers with capacity from 6 m’to 8 m3
The PMB7 is used on concrete mixers with capacity from 8 m’ to 12 m’
The PMB8 is used on concrete mixers with capacity from 12 m’ to 16 m’
For Concrete pump and Mixer truck,we supply below types
| Concrete Mixer parts Hydraulic Motor Hydraulic Pump |
Eaton seires, |
| 90R series, | |
| Rexroth A4VTG71, A4VTG90, A2FM80, A2FM63, | |
| Sauer PV21, PV22, PV23 … PV27series;MF22,MF23 | |
| PMP 90/110 pump, PMP 90/110 Motor | |
| gear box | P3301,P4300,P5300,P7300, PMB6.0, PMB6.1 PMB6.5,PMB7.1,PMP7.5, PLM7,PLM9,CLM10 575L,577L,580L TMG51.2,TMG61.2,TMG71.2 |
| Orbit Motor | OMH 500, OMH750, BRH470, BMP160… |
| Hydraulic Pump | A10VSO, A6VM, A11VLO, A4VG, A2FO, A7VO, A2FM, A4VO… |
Elephant Fluid specializes in the manufacture, assembly, export, sales and service of various hydraulic pumps, hydraulic motors and hydraulic accessories. ZheJiang Xihu (West Lake) Dis.CHINAMFG Machinery Equipment Technology Co., Ltd., as the primary agent of CHINAMFG Fluid Power, has the same business scope as CHINAMFG Fluid Power. CHINAMFG Fluid Power Technical team has many years of operation and service experience, Provide customers with professional hydraulic system solutions, Quality assurance of quality products. We have many years in hydraulic system products, 1-7 days, fixed sales engineer , agreement specific delivery period , Years of industry experience, sales, repairs, commissioning, maintenance, Super fast one-stop professional service, Provide a technical response within 2 hours of the standard warranty, Effectively guarantee the quality of hydraulic products, Worry-free delivery time 1300 kinds in stock , One-stop service, directly with the manufacturer, Provide complete hydraulic system solutions, Comprehensive guidance to provide technical services within 1 working day, Rigorous processing and excellent quality. We have over 20 years experience, so we could gather the best resources to our customers. And we have the best professional pre-sales and after-sales system in China. Most importantly, we can provide the products at competitive price with quality guaranteed and fast delivery. We believe the science and technology always change the world. In the future, CHINAMFG fluid power will strive to build an international first-class brand of enterprise, create contributions to society, create value for customers, and bring happiness to the employees.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Gear Shape: | Cylindrical Gear |
| Step: | Three-Step |
| Type: | Planetary Gear Reducer |
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2024-05-14