Tag Archives: automatic gearbox

China Hot selling Nmrv Series Worm Reduction Gearbox automatic gearbox

Product Description

Product Description

  • NMRV – Sizes:–150
  • Input Options: with input shaft, With Square flange,With Input Flange
  • Input Power 0.06 to 11 kW
  • NMRV-Size from 030 to 105 in die-cast aluminium alloy budy and over 110 in cast iron
  • Ratios between 5 and 100
  • Max torque 1550 N.m and admissible output radial loads max 8771 N
  • Aluminium units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity
  • Worm wheel: Copper (KK Cu). 
  • Loading capacity in accordance with: ISO 9001:2015/GB/T 19001-2016
  • Size 030 and over are painted with RAL 5571 blue
  • Worm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRVpower+NMRV, JWB+NMRV
  • NMRV, NRV+VS,NMRV+AS,NMRV+VS,NMRV+F
  • Options: torque arm, output flange, viton oil seals, low/high temperature oil, filling/drain/breather/level plug,Small gap

       

Model Output Torque Output Shaft Dia.
NMRV030  21N.m  φ14
NMRV040  45N.m  φ19
NMRV050  84N.m  φ25
NMRV063  160N.m  φ25
NMRV075  230N.m  φ28
NMRV090  410N.m  φ35
NMRV105  630N.m  φ42
NMRV110  725N.m  φ42
NMRV130  1050N.m  φ45
NMRV150  1550N.m  φ50

Quality Control

Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy: to enhance the overall level in the field of power transmission  
Quality View: Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state. After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.
 

Matching Power Form

Detailed Photos

Packaging & Shipping

Certifications

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step
Samples:
US$ 40/Piece
1 Piece(Min.Order)

|
Request Sample

gearbox

Different Types of Gearboxes and Their Applications

There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:

  • Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
  • Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
  • Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
  • Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
  • Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
  • Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
  • Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.

Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.

China Hot selling Nmrv Series Worm Reduction Gearbox   automatic gearbox	China Hot selling Nmrv Series Worm Reduction Gearbox   automatic gearbox
editor by CX 2024-04-16

China wholesaler Auto Car Parts Steering Gearbox Suitable for CZPT Prius 12-17 J39 45510-47040 best automatic gearbox

Product Description

Product Description

1. Certificate: ISO9001

2. Guarantee: 12 months
We can supply for left hand
Our Power & Manual steering rack is popupar to America, west Europe and South Africa.
We can produce different steeting gear according to customer’s demand. With experience and technique advantage, we can be trusted to customize every detail of your order.  We also supply Other Volkswagen steering gear.

Packaging & Shipping

Company Profile

  Established in 2018, ZheJiang CHINAMFG AUTO PARTS CO.,LTD covers 20000 square meters, located in HangZhou city, ZheJiang province, which is focus on auto steering gear development ,design, manufacturing and after sales service.

 

    Over the years , we uphold professional and innovative spirit , make the margin CHINAMFG the road of steady and rapid development of CHINAMFG enterprises, actively explore the ever-changing automobile market, the quality excellent products to all over the world . At present , our products was export to America,Europe,South America,South east Asia,Middle East and so on.

 

   Companies adhering to the “to the quality strives for the survival, to the quality of development” policy.we always regards customers as god, meet customer requirements at the same time, continuously absorb advanced technique, constantly perfect self innovation products, better service the vast number of users.

 

FAQ

 

1,Are you factory?
Yes,We are professional factory of steering racks.
 
2. Do you have neutral packing?
Yes, we have neutral packing ,or depends on customer’s require.

3. How long times guarantee of your product?
As general, 12 months
Electronic product, 6 month guarantee.

4. What could you do if customer return good?
Change a new one, or customer send it back to us and we return money.

5. How long for delivery time after order paid?
As usual, all products are in stock, 3-10 days. If not in stock, need more days.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 12 Months
Warranty: 12 Months
Type: Steering Gears/Shaft
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gearbox

Different Types of Gearboxes and Their Applications

There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:

  • Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
  • Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
  • Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
  • Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
  • Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
  • Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
  • Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.

Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.

China wholesaler Auto Car Parts Steering Gearbox Suitable for CZPT Prius 12-17 J39 45510-47040   best automatic gearbox	China wholesaler Auto Car Parts Steering Gearbox Suitable for CZPT Prius 12-17 J39 45510-47040   best automatic gearbox
editor by CX 2024-04-12

China wholesaler Hw19710 Auto Transmission Gear Box for CZPT CZPT CZPT Zf Truck Automatic Gearbox Assy bevel gearbox

Product Description

HW19710 auto transmission gear box for CHINAMFG CHINAMFG CHINAMFG ZF truck automatic gearbyox assy

 

Product Description

High filtration performance (cleaning effect);Long life (large catch);

Durable vibration, high durability, no dust leakage;

Water resistance, will not block the entry of air,

simple and light loading and unloading.

Detailed Photos

The upper and lower covers of the air filter are made of Pu rubber with good elasticity, hydrolysis resistance, corrosion
resistance and safety. 100% seal can supply clean air to engine.

Packaging & Shipping

1. Our packing uses export wooden cases, plastic boxes, cartons or pallets. All the package are very strong, the wooden box is firmly bound, the package is covered with a waterproof film to prevent water or damage during transportation.
2. According to the quantity, we can use express delivery, air transportation or CHINAMFG transportation, automobile transportation, railway transportation, etc. we have our own freight forwarders, and we can also use the designated freight forwarders of customers, which can meet various delivery requirements of customers, such as EXW, FOB, CIF, etc.It can also be exported from many ports in China.

Company Profile

HangZhou CHINAMFG International Trade Co., Ltd. was established in 2003. It has been engaged in the export of auto parts and
construction machinery parts for 8 years. Our main business is to export truck parts and construction machinery parts to
Russia,Europe and Southeast Asia, such as SINOTRUK, Shaanqi, Xihu (West Lake) Dis., XCMG, Shantui, JAC, Cummins, JCB, caterpillar, Isuzu, Yanmar, lgmg, CHINAMFG The company has its own warehouse in HangZhou, covering an area of 2000 square meters, and has a lot of inventory,and has the ability to quickly collect and deliver accessories. We always adhere to the quality of products as the core, to serve customers for the purpose. Hope to be able to better communicate with friends from all over the world.

Our Advantages

The company ‘s goods are of good quality and exquieite packaging ,All filters passed 14 rigorous tests 100%.And have passed theaudit of many chinese qualification inspection institutions and obtained many certificates,so it ‘s very popular in every countries.All of our products have passed 14 strict tests and are of high quality, meeting the quality standards of various countries.

FAQ

1. who are we?
We are based in ZheJiang , China, start from 2013,sell to Mid East(50.00%),Eastern Europe(20.00%),Eastern Asia(10.00%),South America(7.00%),Southeast Asia(5.00%),Africa(4.00%),North America(3.00%),Domestic Market(00.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Heavy Truck Parts and Construction Machinery Parts/Filter/Turbocharger/Clutch Disc/Clutch Cover/Water Pump/Truck Chassis Parts

4. why should you buy from us not from other suppliers?
HangZhou CHINAMFG International Trade Co., Ltd. is located in HangZhou city, the capital of ZheJiang Province. Main products are heavy truck accessories, light truck parts, engineering machinery parts and so on. We have perfect service system.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 6 Months
Warranty: 6 Months
Type: Cargo Winch Strap
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gearbox

How to Calculate Gear Ratio in a Gearbox

Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:

Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear

Here’s a step-by-step guide on how to calculate gear ratio:

  1. Identify the input and output gears in the gearbox.
  2. Count the number of teeth on the output gear (the gear connected to the output shaft).
  3. Count the number of teeth on the input gear (the gear connected to the input shaft).
  4. Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
  5. Calculate the gear ratio by performing the division.

The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.

China wholesaler Hw19710 Auto Transmission Gear Box for CZPT CZPT CZPT Zf Truck Automatic Gearbox Assy   bevel gearbox	China wholesaler Hw19710 Auto Transmission Gear Box for CZPT CZPT CZPT Zf Truck Automatic Gearbox Assy   bevel gearbox
editor by CX 2024-04-09

China Custom ZD Excellent Performance Wholesale New Product 3000rpm Planetary Circular Gearbox For Packing Machine automatic gearbox

Product Description

Model Selection

 

ZD Leader has a wide range of micro motor production lines in the industry, including DC Motor, AC Motor, Brushless Motor, Planetary Gear Motor, Drum Motor, Planetary Gearbox, RV Reducer and Harmonic Gearbox etc. Through technical innovation and customization, we help you create outstanding application systems and provide flexible solutions for various industrial automation situations.

• Model Selection
Our professional sales representive and technical team will choose the right model and transmission solutions for your usage depend on your specific parameters.

• Drawing Request

If you need more product parameters, catalogues, CAD or 3D drawings, please contact us.
 

• On Your Need

We can modify standard products or customize them to meet your specific needs.

Detailed Photos

Product Parameters

Other Related Products

Click here to find what you are looking for:

Company Profile

 

FAQ

Q: What’re your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge.

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor
Layout: Cycloidal
Installation: Vertical Type
Step: Double-Step
Size: 32, 42, 52, 62,72mm
Manipulate Way: Forced Manipulation
Customization:
Available

|

Customized Request

gearbox

What is a Gearbox and How Does It Work?

A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.

Here’s how a gearbox works:

  1. Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
  2. Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
  3. Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
  4. Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.

Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.

China Custom ZD Excellent Performance Wholesale New Product 3000rpm Planetary Circular Gearbox For Packing Machine   automatic gearbox	China Custom ZD Excellent Performance Wholesale New Product 3000rpm Planetary Circular Gearbox For Packing Machine   automatic gearbox
editor by CX 2024-04-03

China best Factory Direct Final Drive Track Gearbox Reducer Concrete Mixer Speed Reducer Wheel and Crawler Trucks Gear Box Planetary Gear Reducer best automatic gearbox

Product Description

 

Company Introduction

We CHINAMFG is a OEM factory, accpet customerized. Most of our products are customerzation.The product include gear housing/boxes/reducers, Iron casting products, Aluminum products. Such as auto parts, agriculture parts, and other industrial parts.
We have the most advanced testing facilities, such as spectral analyzer for rubber material chemical composition test, tensile strength testing machine, impact value tester and hardness meter, magnetic particle testing machine, sandblasting machine and heat treatment equipment. Besides, there are numerous advanced equipment in the precision machining workshop: have 23 sets CNC lathes, 10sets vertical CNC boring and milling center and 1 horizontal boring and milling center imported from Korea, 2 general milling machine, and 2 general lathes, 1 grinder, 10sets drilling and tap machines, 2 half automatic saw, and 1 Coordinate Measuring Machine (CMM), 1 Projector and 1 machining surface quality testing machine and 1 Mahr altitude instrument. Our product’s tolerance can be controlled under 0.01mm. The testing machine’s accuracy is within 0.005mm. ISO9000 has been executed.

Product Specification

The GFT series of travel speed reducers are ideal for driving vehicles and other mobile equipment with gear or chain drive. In addition, it can be applied wherever there is movement, rotation and placement. The GFT has different models for wide range of its use with compact structure, hardened surfaces which gives the equipment excellent load bearing capacity and operational reliability.

TYPE Max. Output Torque Reduction Ratio Adapting Hydraulic Motor Weight
GFT17 T2 17000 N.m 26.43
32.14
37.57
45.42
53.95
A2FE45/61W-VZ
A2FE56/61W-VZL
A2FE63/61W-VZL
A6VE28/63W-VAL
A6VE55/63W-VZL  
90 KG
GFT17 T3 17000 N.m 77.95
88.23
102.62
A2FE45/61W-VZL
A2FE56/61W-VZL
A2FE63/61W-VZL
A6VE28/63W-VAL 
A6VE55/63W-VZL  
100 KG
GFT36 T3 36000 N.m 66.96
79.36
100.02
116.55
131.00
A2FE45/61W-VZL
A2FE56/61W-VZL
A2FE63/61W-VZL
A2FE80/61W-VAL
A2FE90/61W-VAL 
A6VE55/63W-VZL
A6VE80/63W-VAL
170 KG
GFT60 T3 60000 N.m 86.46
105.53
119.83
139.86
169.89
A2FE80/61W-VAL                 
A2FE90/61W-VAL                       
A2FE107/61W-VZL       
A2FE125/61W-VZL
A6VE80/63W-VAL
A6VE107/63W-VZL
230 KG
GFT80 T3 80000 N.m 76.68
98.97
126.94
149.92
185.43
A2FE107/61W-VZL                  
A2FE125/61W-VZL
A2FE160/61W-VZL                  
A2FE180/61W-VZL                    A6VE107/63W-VZL                  
A6VE160/63W-VZL
350 KG
GFT110 T3 110000 N.m 95.83
114.83
128.60
147.24
173.86
215.00
 A2FE107/61W-VZL                 
A2FE125/61W-VZL
A2FE160/61W-VZL                  
A2FE180/61W-VZL    A6VE107/63W-VZL                  
A2FE160/63W-VZL
395 KG

 

Product Iamges

 

Cooperation Partner

Factory Showing

Inspection Center

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Samples:
US$ 1100/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gearbox

Can I Use Synthetic Oil in My Gearbox?

Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:

  • Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
  • Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
  • Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
  • Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
  • Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
  • Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
  • Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.

However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.

China best Factory Direct Final Drive Track Gearbox Reducer Concrete Mixer Speed Reducer Wheel and Crawler Trucks Gear Box Planetary Gear Reducer   best automatic gearbox	China best Factory Direct Final Drive Track Gearbox Reducer Concrete Mixer Speed Reducer Wheel and Crawler Trucks Gear Box Planetary Gear Reducer   best automatic gearbox
editor by CX 2024-03-29

China Hot selling CZPT CZPT Hw15710/Hw19710t 10 Gears Transmission Gearbox Plate Wg2229100072 for Sale best automatic gearbox

Product Description

Main Gearbox Parts:Transmission Front Housing & Control System, Transimission Housing -Middle, Lay Shaft, Main Shaft, Idle Wheel, Sub Gearbox 1, Sub Gearbox 2, Import Shaft and Cover, Small Cover, Fork Shaft(HW19710), (HW19710)/Pump and Pipe(HW19710), Air Pipeand.

 

PART(S) NUMBER

Part Name

AZ2203040405

Main Shaft Ass.

AZ

Lay Shaft-left

AZ

Lay Shaft-right

AZ2203210040

Small Cover Ass.

WG2215710009

Synchronizer Ring

WG2203250003

Double H Valve

WG220325571

Pneumatic Control Valve

WG2209280003

Pressure Switch

Q2881016F9

Set Screw

WG2214260001

Clutch Release Fork

AZ2220000001

Transmission Front Housing

AZ225711005

Transmission Middle Housing

AZ

Lay Shaft Forth Gear

WG

Idler Shaft

AZ225710040

Range Gear Subbox Ass.

WG2225100002

Planetary Rack

AZ2225100001

Output Shaft

WG2229100042

Fork Pendulum Block

WG2222100009

Range Block Cylinder

WG225710009

Odometer Connector Ass.

AZ2225715715

Transmission Back Housing

WG2229571001

Synchronous Push Block

WG2215710004

Planetary Wheel

WG2222571001

Input Shaft End Cap

WG2229210041

Support Rod Ass.

WG2229210014

Sensor Drive Ring

AZ2214215713

Shift Head

WG2229270003

Gear Selection Support Shaft

WG2203240005

Oil Pump Ass.

Female Screw

 

 

Sincere to customer and in good faith of quality is our forever followed motto. It’s the basement to be a human and on business. We take all responsibility for our products and service sincerely.

 

 

 

 

Company brief introduction:
We are established in 2571. The company is located in HangZhou City, ZheJiang Province, where CHINAMFG is located.Sincere to the customer and in good faith of quality is Deruna Heavy Truck Parts forever followed motto. It’s the basement to be a human and do business. We take all responsibility for our products and service sincerely.

Main product:

Our company specializing in the manufacturing and wholesale of China National Heavy Duty Truck, ZheJiang Heavy Duty Truck, Beiben truck, CHINAMFG truck and its related accessories. We mainly engage in various accessories products such as truck parts, cylinder blocks, crankshafts, diesel engines.
1.Power parts, including engines and peripheral parts [such as starters, generators, superchargers, various filter elements, etc.
2. Driving Part [also called transmission part], including clutch, gearbox, transmission shaft, axle, etc.;
3. Suspension part, including front and rear steel plates and fasteners, balance shaft, thrust rod, etc.
4. Steering part, including steering gear and Horizontal pull rods, etc.
5. Electrical appliances and valve parts, including various types of electrical switches, wiring harnesses, bulbs, and various braking components (valves).
6. Control and cargo parts, namely cab and cargo compartment.
7. Frame [that is, the beam] and so on.

Overseas market at present:

Our sales have averaged over 10 years of experience in exporting, and are proficient in all processes of business operation which can efficiently fulfill customer needs.

We currently export to 37 countries, and the client partners from Russia, New Zealand, Fiji, Papua New Guinea, Malaysia, Zambia, South Sudan, United Arab Emirates, Zimbabwe, Colombia and so on. We can also help you to supply registration documents of the importing in different countries. Welcome new and regular customers to contact us to establish future business relationships and achieve common success!

Q: What if I can not provide part number for reference?A: If no part number, we can judge and quote the requested parts by engine name-plate or photos; It would be great if you could provide us with the chassis number(VIN) so that we can provide a more comprehensive analysis and accurate quote feedback based on your truck model.

Q: Can we buy 1 pcs of truck parts for quality testing?A: Yes, we are glad to send 1pcs item for quality testing if we have the truck parts of you need in stock.

Q: Do you test all your goods before delivery?A: Yes, we have 100% test before delivery.

Q: How do you make our business long-term and good relationship?A: We keep good quality and competitive price to ensure our customers benefit; We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Q: How long is the production time of the goods?A: We have sufficient stock of regular specifications for immediate delivery; Non-conventional specifications generally require stocking for about 7-10 days; Large quantities order need to be in stock for about 15-20 days.

Q: What is the packing?A: Neutral packing of paper carton or wooden case. Or we customize the packaging according to your requirements

Application: Car, Truck
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Optional
Step: Optional
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

What is a Gearbox and How Does It Work?

A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.

Here’s how a gearbox works:

  1. Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
  2. Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
  3. Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
  4. Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.

Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.

China Hot selling CZPT CZPT Hw15710/Hw19710t 10 Gears Transmission Gearbox Plate Wg2229100072 for Sale   best automatic gearbox	China Hot selling CZPT CZPT Hw15710/Hw19710t 10 Gears Transmission Gearbox Plate Wg2229100072 for Sale   best automatic gearbox
editor by CX 2023-11-29

China best Convenient Operation Gear Box Worm Gearbox Transmission Gearbox Locomotive Gearbox Gear Reducer automatic gearbox

Product Description

Locomotive gearbox

Product Description

Locomotive gearbox Features

Type Locomotive gearbox
Application For locomotive traction gear lubrication system
Size customizable
Composed Composed of gear box body, breather, oil filler oil level gauge and other parts.
  • Can be designed according to customer requirements;
  • Composed of gear box body, breather, oil filler oil level gauge and other parts.
  • The welding process implements EN15085 welding system requirements.

Our Advantages

Application

 

Product Display

Company Profile

ZJD is located in Xihu (West Lake) Dis. Economic Development Zone, Xihu (West Lake) Dis. District, HangZhou, ZheJiang , which has very good transportation convenience and location advantages.ZJD own 1 subsidiary, which is located in HangZhou city, ZheJiang province, which is mainly responsible for EMU accessories for CRRC’s factory nearby.
ZJD’s production and office space is more than 12,000 square meters, and more than 60 sets of various types of CNC machining and quality control equipment.ZJD’s main products are widely used in CHINAMFG CR400, CR300, CR200 series standard EMUs, and expanded to subways, export passenger cars and EMUs and other products.
ZJD has more than 60 employees and more than 20 technical management personnel. The technical management team has many years of working experience in the rail transit industry. 

Certifications

ZJD has obtained the national high-tech enterprise certification, 6 types of products have passed the high-tech certification, and related products have obtained more than 20 patents. 
ZJD has established a comprehensive quality management system and has got ISO9001 quality management system certification, ISO/TS 22163 (IRIS) international railway industry standard certification, EN15085-2 railway vehicles welding system certification, and CHINAMFG product supply service qualification certification. 

FAQ

1. Who are we?

HangZhou ZJD Rail Equipment Co.,Ltd. was established in 2012, which is a professional manufacturer of rail equipment and accessories.

2. Are you a reliable supplier?
ZJD-Excellent Manufacturer focusing on the rolling stock industry
Provide full-process Design, Production, Testing and Service according to customer requirements.

3.What can you buy from us?
We have designed and supplied a series of products such an air duct systems, piping systerms, pneumatic control units,etc.The product are used in various fields such an EMUs,subways,locomotives,wagon engineering vehicles,etc. 

4. What services can we provide?
Provide customized services of heavy industry products for special requirements.
Provide diversified parts and trade services such as port machinery, steel heavy industry, mining machinery, etc.
Provide customized products for new energy equipment
Provide key process technology solutions for special parts in the field of new energy equipment.

 

Application: Machinery, Locomotive
Function: Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Type: Cylindrical Gear Box
Transport Package: Box
Customization:
Available

|

Customized Request

gearbox

Different Types of Gearboxes and Their Applications

There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:

  • Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
  • Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
  • Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
  • Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
  • Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
  • Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
  • Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.

Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.

China best Convenient Operation Gear Box Worm Gearbox Transmission Gearbox Locomotive Gearbox Gear Reducer   automatic gearbox	China best Convenient Operation Gear Box Worm Gearbox Transmission Gearbox Locomotive Gearbox Gear Reducer   automatic gearbox
editor by CX 2023-10-25

China wholesaler CZPT 250 Hard Faced Gearbox for Extruder Machines automatic gearbox

Product Description

Product Description

>Introduction
ZLYJ series Reduction Gearbox (speed reducer) is a transmission part for most single screw extrusion line, wihch also possesses high precision hard gear surface and thrust block designed. Designed with standard ZBJ19009-88, it combines well with most of machines from different suppliers. Also the gear and axis parts are made of high strength alloy steel with surface hardness HRC54~62. In the front end of hollow input axis there is large specification thrust bearing that will bear axial thrust force while the screw is working
 

>Applied Circumstance
1. All kind of extrusion & blowing machinery
2. High speed shaft rotation Speed <1500RPM
3. Working Environment Temp. -40~45°C, with temperature below 0°C, should pre-heat lubrication oil to above 0°C
 

>Major Technical Index
1. Output Speed: 16-100 RPM
2. Output Torque: Max.4300 Nm
3. Motor Power: 5.5-200 Kw
 

>Selection of Gearbox
1. Select speed ratio
e.g. input speed n1=1000rpm, output speed n2=70rpm, ratio i=n1/n2=14.28, should select ratio 14
2. Select model type according to input power
e.g. input power P=26kw, after checking form, 29kw>26kw, most ecomonic should be ZLYJ200
3. Select assemble type
as per actual use, select horizontal or vertical type
4. Calculate axial thrust Fa=π*Ds²*Ps/(4*1000)
e.g. Screw diameter Ds=75mm, Screw pressure Ps=26MPa
Fa=π*Ds²*Ps/(4*1000)=114.8kN
187kN>114.8kN, ZLYJ200 can bear the axial thrust and economic to select
5. Confirm connection size
6. Confirm cooling type

Parameters Concerned

Recommended Products

 

 

EXTRUSION SCREW BARREL         INJECTION SCREW BARREL         TWIN SCREW BARREL

Standard: DIN, GB, JIS
Technics: Forging
Feature: Recycle
Material: Metal
Output Speed: 30-180rpm
Ratio: 8, 10, 12.5, 14, 16, 18, 20
Samples:
US$ 2000/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Benefits of Regular Gearbox Maintenance

Regular maintenance of gearboxes offers numerous advantages:

  • Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
  • Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
  • Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
  • Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
  • Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
  • Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
  • Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
  • Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
  • Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.

Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.

China wholesaler CZPT 250 Hard Faced Gearbox for Extruder Machines   automatic gearbox	China wholesaler CZPT 250 Hard Faced Gearbox for Extruder Machines   automatic gearbox
editor by CX 2023-10-08

China wholesaler Big Size Zpt170 1: 1 Direction Change Robot Gearbox best automatic gearbox

Product Description

Relate recommend ?
Planetary gearbox : size 242 and custom size  within 1 stage, 2 stage, 3 stage.
Ac servo motor :Delta, Yasakawa,Panasonic, Mistubishi and economic type
PLC: CHINAMFG semensis Mistubishi and etc
Linear Components: HIWIN, TBI, PMI, ABBA, THK, CPC , and economic type.

Big Size ZPT170 1:1 Direction Change Robot Gearbox 

-Planetary gearbox is a widely used industrial product, which can reduce the speed of motor and increase the output torque. Planetary reducer can be used as supporting parts in lifting, excavation, transportation, construction and other industries.

-Stage Ratio :1:1
-Product picture

-Datasheet

-Company introduction
FOCUS is an automation & drive focused global company, providing global customers with control, display, drive and system solutions & other related products and services, under the support of its excellent electrical and electronic technology as well as strong control technical force.
 
We provide and develop perfect products and solutions according to different requirement of the industry. Our products have been used and applied successfully in packing, printing, textiles, plastic injection, elevator, machine tool, robot,wood cutting, stone carving, ceramic, glass, paper making industry, crane, fan & pump, new energy resources etc.

FOCUS, your professional electrical partner !

-Payment & Package & Delivery 
1,Payment
( T/T , Western union, Paypal , L/C and so on )
2,Pakcage
( Small gearbox use carton package, Big gearbox use wooden box package ) 
3,Delivery
( By International Express,  By Air , By Sea )

 

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: 1:1
Customization:
Available

|

Customized Request

gearbox

How to Choose the Right Gearbox for Your Machinery

Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:

  1. Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
  2. Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
  3. Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
  4. Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
  5. Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
  6. Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
  7. Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
  8. Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
  9. Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
  10. Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
  11. Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.

Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.

China wholesaler Big Size Zpt170 1: 1 Direction Change Robot Gearbox   best automatic gearbox	China wholesaler Big Size Zpt170 1: 1 Direction Change Robot Gearbox   best automatic gearbox
editor by CX 2023-10-05

China Standard Wholesale Dual Clutch Transmission Gearbox with Special Dual-pump Design automatic gearbox

Product Description

Product Description

Features:

  1. 7-speed wet clutch DCT
  2. Max. torque 280Nm/350Nm
  3. Compact structure, easy lay-out
  4. Special dual-pump design
  5. Higher efficiency, lower consumption
  6. Key parts real-time status management
  7. German Technology, local development

Product Parameters

 

Parameters DCT 280 DCT350b
Axial Dimensions [mm] *357 *370
Torque Capacity [Nm] 280 350
Gears 7+1 7+1
Ratio Spread 7.5 7.5
Start/stop Yes Yes
Weight [kg] 79 83
Model Type A, B B, C

 

Product Show

Company Profile

Focus on Brake Assembly and Parts&Electric Power Steering System
KUNTYE Vehicle System (HangZhou) Co., Ltd was established in December 2017. KUNTYE is mainly focused on the research and development, production, and sales of Drivetrain Systems. Meanwhile, the chassis Business Unit and CHINAMFG Inspection and Testing Center under Kuntye will provide chassis system engineering solutions and validation testing services for the market. KUNTYE is committed to becoming a core automobile parts group with first-class innovation capabilities and international competitiveness. 

Production Capacity
The first phase of the factory has a total gross floor area of 63,500 square meters, using an intelligent factory information system to achieve integrated control of data from design, support, sales, procurement, manufacturing, logistics, and other aspects to ensure production process quality and safe production.

Owned and Declared more than 100 Patents
The R&D team is formed by a group of experts from China, Germany, the United States, Japan, and Australia in areas of drivetrain, electric steering, chassis module, control algorithms, testing, etc. KUNTYE insists on positive development, independent innovation, and mastering core technologies.

Work with Us Today
We hope to cooperate with you for mutual development and benefits. We welcome potential buyers to contact us.

Certifications

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in cartons to confirm the safety and completeness of the goods.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.

Q3. How about your delivery time?
A: Generally, it will take 15 to 60 days . The specific delivery time depends on the items and the quantity of your order.We will finish the order as soon as possible.

Q4. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We have R&D team formed by a group of experts from China, Germany, the United States, Japan, and Australia in areas of drivetrain, electric steering, chassis module, control algorithms, testing, etc.

Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q6: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers benefit.We insists on positive development, independent innovation, and mastering core technologies.Welcome potential buyers to contact us!
 

 

 

 

 

 

 

 

 

 

 

 

 

 

Application: Electric Cars, Motorcycle, Car
Function: Speed Changing, Speed Reduction, Speed Increase
Installation: Vertical Type
Type: Electric Drive System
Ratio Spread: 7.5
Weight (kg): 79 / 83
Customization:
Available

|

Customized Request

gearbox

How to Choose the Right Gearbox for Your Machinery

Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:

  1. Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
  2. Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
  3. Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
  4. Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
  5. Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
  6. Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
  7. Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
  8. Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
  9. Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
  10. Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
  11. Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.

Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.

China Standard Wholesale Dual Clutch Transmission Gearbox with Special Dual-pump Design   automatic gearbox	China Standard Wholesale Dual Clutch Transmission Gearbox with Special Dual-pump Design   automatic gearbox
editor by CX 2023-10-03