China Right Angel Helical-Bevel Gear Motor Geared Reducer Gearbox for Bottling Machinery gearbox and motor

Merchandise Description

 

Product Description

 

Merchandise Description

-K Series Helical Bevel Gearbox

Item Characteristics
one. Input method: Coupled motor, belted motor, input shaft or link flange.
2. Output: Right angle
3. Compact composition. Rigid tooth face. Carrying better torque, large loading capacity.
4.Large precision gear, ensuring the device to run stably, easy transmission.
five. Reduced sounds, lengthy lifespan. Large overlap coefficient, abrasion resistant.

 

Merchandise Parameters

1. Technical data

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Enter power score(kw) .18~three .eighteen~three .18~5.5 .eighteen~5.5 .37~11 .seventy five~22 1.3~thirty 3~45 seven.5~90 11~one hundred sixty 11~200 eighteen.5~two hundred
Ratio 5.36~
106.38
five.81~
131.87
6.fifty seven~
145.fifteen
seven.14~four
4.79
7.22~
192.18
7.19~
197.27
eight.ninety five~
a hundred seventy five.47
eight.seventy four~
141.93
8.68~
146.07
twelve.66~
a hundred and fifty.03
17.35~
164.44
seventeen.97~
178.37
Maximum Torque(N.m) two hundred 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

2: Style selection
 

K series gear units are available in the following designs
KAZ..Y.. Short-flange-mounted helical-bevel equipment units with hollow shaft
K…Y… Foot-mounted helical-bevel gear models with solid shaft
KAT…Y… Torque-arm-mounted helical-bevel gear models with hollow shaft
KAB…Y… Foot-mounted helical-bevel gear models with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft enter helical-bevel equipment models
KA…Y… Helical-bevel equipment units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel equipment models with sound shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft input combinatorial helical-bevel equipment units
KAF…Y… Flange-mounted helical-bevel equipment units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the particular 1 ,the flange is needed to be linked

Supplies Information Sheet

 

Housing substance

Gray Forged iron

Housing hardness

HBS163~255

Equipment materials

20CrMnTi alloy metal

Area hardness of gears

HRC58°~sixty two °

Equipment main hardness

HRC33~48

Input / Output shaft materials

40Cr alloy steel

Enter / Output shaft hardness

HRC32~36

Machining precision of gears

exact grinding, 6~5 Quality

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Warmth treatment method

tempering, cementiting, quenching, normalizing, and so on.

Performance

94%~96% (is dependent on the transmission phase)

Sounds (MAX)

sixty~68dB

Temp. increase (MAX)

40°C

Temp. rise (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Manufacturer of bearings

China leading brand bearing, HRB/LYC/ZWZ/C&U. Or other manufacturers asked for, SKF, FAG, INA, NSK.

Brand of oil seal

NAK — ZheJiang or other brand names asked for

 

In depth Photos

 

 

Our process of production

Our solution line

 

Firm Profile

 

Business Profile

Bode  was launched in 2007, which is situated in HangZhou town, ZHangZhoug province. As 1 expert company and exporter, we have much more than 17 years’ experience in R & D of worm reducer, equipment reducer, gearbox , AC motor and relative spare parts. We have manufacturing facility with superior production and check products, the powerful growth of group and producing capability provide our consumers with large high quality merchandise. Our merchandise broadly served to numerous industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, medication, wood etc. Main marketplaces: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any queries, very good offer usually for you for extended time period company.

FAQ

Q1: Are you investing company or company?
A: We are factory.

Q2: What types of gearbox can you create for us?
A: Major items of our company: R, S, K, F sequence helical-tooth reducer, RV collection worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as for each custom made drawing?
A: Yes, we provide custom-made services for buyers.

This autumn: Can we acquire 1 computer of every single merchandise for good quality tests?
A: Sure, we are glad to acknowledge trial purchase for quality screening.

Q5: What information shall we give prior to positioning a purchase buy?
A:  a) Variety of the gearbox, ratio, input and output sort, input flange, mounting situation, and motor informationetc.
     b) Housing coloration.
     c) Purchase amount.
     d) Other special needs.

Q6: How long is your delivery time?
A: Normally it is 5-ten times if the products are in stock. or it is 15-twenty days if the products are not in stock.

Q7: What is your terms of payment ?
A: thirty% Advance payment by T/T following signing the contract.70% just before shipping

If you are interested in our item, welcome to contact with us.
Our group will do our greatest to meet up with your need to have 🙂 
 

 

US $90-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw) 0.18~3 0.18~3 0.18~5.5 0.18~5.5 0.37~11 0.75~22 1.3~30 3~45 7.5~90 11~160 11~200 18.5~200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~4
4.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~
164.44
17.97~
178.37
Maximum Torque(N.m) 200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

###

K series gear units are available in the following designs
KAZ..Y.. Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y… Foot-mounted helical-bevel gear units with solid shaft
KAT…Y… Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y… Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft input helical-bevel gear units
KA…Y… Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel gear units with solid shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft input combinatorial helical-bevel gear units
KAF…Y… Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the special one ,the flange is required to be connected

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested
US $90-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw) 0.18~3 0.18~3 0.18~5.5 0.18~5.5 0.37~11 0.75~22 1.3~30 3~45 7.5~90 11~160 11~200 18.5~200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~4
4.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~
164.44
17.97~
178.37
Maximum Torque(N.m) 200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

###

K series gear units are available in the following designs
KAZ..Y.. Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y… Foot-mounted helical-bevel gear units with solid shaft
KAT…Y… Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y… Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft input helical-bevel gear units
KA…Y… Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel gear units with solid shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft input combinatorial helical-bevel gear units
KAF…Y… Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the special one ,the flange is required to be connected

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

Choosing a Gearbox For Your Application

The gearbox is an essential part of bicycles. It is used for several purposes, including speed and force. A gearbox is used to achieve one or both of these goals, but there is always a trade-off. Increasing speed increases wheel speed and forces on the wheels. Similarly, increasing pedal force increases the force on the wheels. This makes it easier for cyclists to accelerate their bicycles. However, this compromise makes the gearbox less efficient than an ideal one.
gearbox

Dimensions

Gearboxes come in different sizes, so the size of your unit depends on the number of stages. Using a chart to determine how many stages are required will help you determine the dimensions of your unit. The ratios of individual stages are normally greater at the top and get smaller as you get closer to the last reduction. This information is important when choosing the right gearbox for your application. However, the dimensions of your gearbox do not have to be exact. Some manufacturers have guides that outline the required dimensions.
The service factor of a gearbox is a combination of the required reliability, the actual service condition, and the load that the gearbox will endure. It can range from 1.0 to 1.4. If the service factor of a gearbox is 1.0, it means that the unit has just enough capacity to meet your needs, but any extra requirements could cause the unit to fail or overheat. However, service factors of 1.4 are generally sufficient for most industrial applications, since they indicate that a gearbox can withstand 1.4 times its application requirement.
Different sizes also have different shapes. Some types are concentric, while others are parallel or at a right angle. The fourth type of gearbox is called shaft mount and is used when mounting the gearbox by foot is impossible. We will discuss the different mounting positions later. In the meantime, keep these dimensions in mind when choosing a gearbox for your application. If you have space constraints, a concentric gearbox is usually your best option.

Construction

The design and construction of a gearbox entails the integration of various components into a single structure. The components of a gearbox must have sufficient rigidity and adequate vibration damping properties. The design guidelines note the approximate values for the components and recommend the production method. Empirical formulas were used to determine the dimensions of the various components. It was found that these methods can simplify the design process. These methods are also used to calculate the angular and axial displacements of the components of the gearbox.
In this project, we used a 3D modeling software called SOLIDWORKS to create a 3-D model of a gear reducer. We used this software to simulate the structure of the gearbox, and it has powerful design automation tools. Although the gear reducer and housing are separate parts, we model them as a single body. To save time, we also removed the auxiliary elements, such as oil inlets and oil level indicators, from the 3D model.
Our method is based on parameter-optimized deep neural networks (DBNs). This model has both supervised and unsupervised learning capabilities, allowing it to be self-adaptive. This method is superior to traditional methods, which have poor self-adaptive feature extraction and shallow network generalization. Our algorithm is able to recognize faults in different states of the gearbox using its vibration signal. We have tested our model on two gearboxes.
With the help of advanced material science technologies, we can now manufacture the housing for the gearbox using high-quality steel and aluminium alloys. In addition, advanced telematics systems have increased the response time of manufacturers. These technologies are expected to create tremendous opportunities in the coming years and fuel the growth of the gearbox housing market. There are many different ways to construct a gearbox, and these techniques are highly customizable. In this study, we will consider the design and construction of various gearbox types, as well as their components.
gearbox

Working

A gearbox is a mechanical device that transmits power from one gear to another. The different types of gears are called planetary gears and are used in a variety of applications. Depending on the type of gearbox, it may be concentric, parallel, or at a right angle. The fourth type of gearbox is a shaft mount. The shaft mount type is used in applications that cannot be mounted by foot. The various mounting positions will be discussed later.
Many design guidelines recommend a service factor of 1.0, which needs to be adjusted based on actual service conditions. This factor is the combined measure of external load, required reliability, and overall gearbox life. In general, published service factors are the minimum requirements for a particular application, but a higher value is necessary for severe loading. This calculation is also recommended for high-speed gearboxes. However, the service factor should not be a sole determining factor in the selection process.
The second gear of a pair of gears has more teeth than the first gear. It also turns slower, but with greater torque. The second gear always turns in the opposite direction. The animation demonstrates this change in direction. A gearbox can also have more than one pair of gears, and a first gear may be used for the reverse. When a gear is shifted from one position to another, the second gear is engaged and the first gear is engaged again.
Another term used to describe a gearbox is “gear box.” This term is an interchangeable term for different mechanical units containing gears. Gearboxes are commonly used to alter speed and torque in various applications. Hence, understanding the gearbox and its parts is essential to maintaining your car’s performance. If you want to extend the life of your vehicle, be sure to check the gearbox’s efficiency. The better its functioning, the less likely it is to fail.

Advantages

Automatic transmission boxes are almost identical to mechanical transmission boxes, but they also have an electronic component that determines the comfort of the driver. Automatic transmission boxes use special blocks to manage shifts effectively and take into account information from other systems, as well as the driver’s input. This ensures accuracy and positioning. The following are a few gearbox advantages:
A gearbox creates a small amount of drag when pedaling, but this drag is offset by the increased effort to climb. The external derailleur system is more efficient when adjusted for friction, but it does not create as little drag in dry conditions. The internal gearbox allows engineers to tune the shifting system to minimize braking issues, pedal kickback, and chain growth. As a result, an internal gearbox is a great choice for bikes with high-performance components.
Helical gearboxes offer some advantages, including a low noise level and lower vibration. They are also highly durable and reliable. They can be extended in modular fashion, which makes them more expensive. Gearboxes are best for applications involving heavy loads. Alternatively, you can opt for a gearbox with multiple teeth. A helical gearbox is more durable and robust, but it is also more expensive. However, the benefits far outweigh the disadvantages.
A gearbox with a manual transmission is often more energy-efficient than one with an automatic transmission. Moreover, these cars typically have lower fuel consumption and higher emissions than their automatic counterparts. In addition, the driver does not have to worry about the brakes wearing out quickly. Another advantage of a manual transmission is its affordability. A manual transmission is often available at a lower cost than its automatic counterpart, and repairs and interventions are easier and less costly. And if you have a mechanical problem with the gearbox, you can control the fuel consumption of your vehicle with appropriate driving habits.
gearbox

Application

While choosing a gearbox for a specific application, the customer should consider the load on the output shaft. High impact loads will wear out gear teeth and shaft bearings, requiring higher service factors. Other factors to consider are the size and style of the output shaft and the environment. Detailed information on these factors will help the customer choose the best gearbox. Several sizing programs are available to determine the most appropriate gearbox for a specific application.
The sizing of a gearbox depends on its input speed, torque, and the motor shaft diameter. The input speed must not exceed the required gearbox’s rating, as high speeds can cause premature seal wear. A low-backlash gearbox may be sufficient for a particular application. Using an output mechanism of the correct size may help increase the input speed. However, this is not recommended for all applications. To choose the right gearbox, check the manufacturer’s warranty and contact customer service representatives.
Different gearboxes have different strengths and weaknesses. A standard gearbox should be durable and flexible, but it must also be able to transfer torque efficiently. There are various types of gears, including open gearing, helical gears, and spur gears. Some of the types of gears can be used to power large industrial machines. For example, the most popular type of gearbox is the planetary drive gearbox. These are used in material handling equipment, conveyor systems, power plants, plastics, and mining. Gearboxes can be used for high-speed applications, such as conveyors, crushers, and moving monorail systems.
Service factors determine the life of a gearbox. Often, manufacturers recommend a service factor of 1.0. However, the actual value may be higher or lower than that. It is often useful to consider the service factor when choosing a gearbox for a particular application. A service factor of 1.4 means that the gearbox can handle 1.4 times the load required. For example, a 1,000-inch-pound gearbox would need a 1,400-inch-pound gearbox. Service factors can be adjusted to suit different applications and conditions.

China Right Angel Helical-Bevel Gear Motor Geared Reducer Gearbox for Bottling Machinery     gearbox and motor	China Right Angel Helical-Bevel Gear Motor Geared Reducer Gearbox for Bottling Machinery     gearbox and motor
editor by czh 2023-01-04